Investigation of bending fatigue-life of aluminum sheets based on rolling direction

被引：22
作者：
Sakin, Raif [1 ]
机构：
[1] Balikesir Univ, Edremit Vocat Sch Higher Educ, Dept Machine & Met Technol, TR-10300 Edremit, Balikesir, Turkey
来源：
ALEXANDRIA ENGINEERING JOURNAL | 2018年 / 57卷 / 01期
关键词：
AA1100; AA1050; Aluminum sheet; Bending fatigue life; Rolling direction; HIGH-CYCLE FATIGUE; WEIBULL DISTRIBUTION; FRACTURE-BEHAVIOR; MAGNESIUM ALLOY; CRACK-GROWTH; COMPOSITES; CAST; DEFORMATION; PREDICTION; APPARATUS;
D O I：
10.1016/j.aej.2016.11.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
High-cycle fatigue (HCF) and low-cycle fatigue (LCF) fatigue lives of rolled AA1100 and AA1050 aluminum sheets along different directions were evaluated at room temperature. Four types of samples denoted as longitudinal (L) and transverse (T) to the rolling direction were compared because the samples along the two typical directions show an obvious anisotropy. A cantilever plane-bending and multi-type fatigue testing machine was specially designed for this purpose. Deflection-controlled fatigue tests were conducted under fully reversed loading. The longest fatigue lives in the LCF region were obtained for AA1050 (L) while AA1100 (L) samples had the longest fatigue lives in the HCF region. (C) 2016 Faculty of Engineering, Alexandria University. Production and hosting by Elsevier B.V.
引用
收藏
页码：35 / 47
页数：13
相关论文
共 50 条
  • [31] Cyclic deformation behavior and fatigue life modeling of CNT-reinforced heterogeneous aluminum-based nanocomposite
    Mohammed, S. M. A. K.
    Chen, D. L.
    Liu, Z. Y.
    Wang, Q. Z.
    Ni, D. R.
    Xiao, B. L.
    Ma, Z. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 840
  • [32] Fatigue life prediction of aluminum alloy T-welded joints root failure based on equivalent crack method
    Wang, Chao
    Yang, Bing
    Zhu, Tao
    Tian, Xiaochen
    Xiao, Shoune
    Yang, Guangwu
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2023, 46 (09) : 3209 - 3224
  • [33] Effect of rolling direction on bent fatigue crack propagation behavior in copper film (Based on discontinuous displacement along a crack obtained by using film fatigue testing under mixed-mode condition)
    Shimizu K.
    Torii T.
    Maruyama K.
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2010, 76 (768): : 60 - 67
  • [34] Simulation-based optimization of laser shock peening process for improved bending fatigue life of Ti-6Al-2Sn-4Zr-2Mo alloy
    Bhamare, Sagar
    Ramakrishnan, Gokul
    Mannava, Seetha R.
    Langer, Kristina
    Vasudevan, Vijay K.
    Qian, Dong
    SURFACE & COATINGS TECHNOLOGY, 2013, 232 : 464 - 474
  • [35] STUDY ON GEAR BENDING FATIGUE-STRENGTH DESIGN BASED ON RELIABILITY ENGINEERING (PREDICTION OF CRACK-PROPAGATION AND FATIGUE LIFE OF MAC14 SUPERCARBURIZED STEEL GEAR)
    NAGAMURA, K
    TERAUCHI, Y
    MARTOWIBOWO, SY
    JSME INTERNATIONAL JOURNAL SERIES C-DYNAMICS CONTROL ROBOTICS DESIGN AND MANUFACTURING, 1994, 37 (04): : 795 - 803
  • [36] An Numerical Investigation on the Effect of the Combination of Cold Expansion and Interference Fitting on Fatigue Life Improvement of a 7075-T6 Aluminum Alloy Single Plate
    Huang, Yongjie
    Guan, Zhidong
    Li, Zengshan
    Liu, Faqi
    He, Yamei
    Dan, Hu
    2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE), 2017, : 632 - 638
  • [37] Effects of manufacturing direction, heat-treatment and surface operations on fatigue life in additively manufactured metals: An analysis based on statistics and artificial intelligence
    Yaren, Mehmet F.
    John, Edward
    Susmel, Luca
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2025,
  • [38] Investigation on the mode of failures and fatigue life of laser-based powder bed fusion produced stainless steel parts under variable amplitude loading conditions
    Sarkar, Sagar
    Kumar, Cheruvu Siva
    Nath, Ashish Kumar
    ADDITIVE MANUFACTURING, 2019, 25 : 71 - 83
  • [39] Kinematic investigation and fatigue life analysis of angular contact ball bearing in wide speed range based on raceway friction
    Liu, Yue
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2020, 72 (07) : 845 - 850
  • [40] Continuum damage mechanics-based approach to the fatigue life prediction for 7050-T7451 aluminum alloy with impact pit
    Zhan, Zhixin
    Hu, Weiping
    Meng, Qingchun
    Shi, Sidian
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2016, 25 (07) : 943 - 966
12345