Investigation of bending fatigue-life of aluminum sheets based on rolling direction

被引：22
作者：
Sakin, Raif [1 ]
机构：
[1] Balikesir Univ, Edremit Vocat Sch Higher Educ, Dept Machine & Met Technol, TR-10300 Edremit, Balikesir, Turkey
来源：
ALEXANDRIA ENGINEERING JOURNAL | 2018年 / 57卷 / 01期
关键词：
AA1100; AA1050; Aluminum sheet; Bending fatigue life; Rolling direction; HIGH-CYCLE FATIGUE; WEIBULL DISTRIBUTION; FRACTURE-BEHAVIOR; MAGNESIUM ALLOY; CRACK-GROWTH; COMPOSITES; CAST; DEFORMATION; PREDICTION; APPARATUS;
D O I：
10.1016/j.aej.2016.11.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
High-cycle fatigue (HCF) and low-cycle fatigue (LCF) fatigue lives of rolled AA1100 and AA1050 aluminum sheets along different directions were evaluated at room temperature. Four types of samples denoted as longitudinal (L) and transverse (T) to the rolling direction were compared because the samples along the two typical directions show an obvious anisotropy. A cantilever plane-bending and multi-type fatigue testing machine was specially designed for this purpose. Deflection-controlled fatigue tests were conducted under fully reversed loading. The longest fatigue lives in the LCF region were obtained for AA1050 (L) while AA1100 (L) samples had the longest fatigue lives in the HCF region. (C) 2016 Faculty of Engineering, Alexandria University. Production and hosting by Elsevier B.V.
引用
收藏
页码：35 / 47
页数：13
相关论文
共 50 条
  • [21] Fatigue life analysis for 6061-T6 aluminum alloy based on surface roughness
    Yang, Yali
    Chen, Hao
    Feng, Wang
    Xu, Sha
    Li, Yongfang
    Zhang, Ruoping
    PLOS ONE, 2021, 16 (06):
  • [22] Micromechanics-Based Low Cycle Fatigue Life Prediction Model of ECAPed Aluminum Alloy
    Sun, Teng
    Xie, Yiji
    Pan, Yuchen
    Zheng, Zhanguang
    Xie, Changji
    Huang, Zeng
    METALS, 2022, 12 (07)
  • [23] Investigation of the fatigue life relationship among different geometry combinations of the 3-point bending cylinder (3PBC) fatigue test for asphalt concrete
    Seitllari, Aksel
    Kutay, M. Emin
    INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2023, 24 (01)
  • [24] Failure modes and fatigue life estimations of spot friction welds in cross-tension specimens of aluminum 6061-T6 sheets
    Lin, P. -C.
    Su, Z. -M.
    He, R. -Y.
    Lin, Z. -L.
    INTERNATIONAL JOURNAL OF FATIGUE, 2012, 38 : 25 - 35
  • [25] Load Distribution and Bending Fatigue Life Analysis of Hub Bearings Based on Modified L-P Model
    Lin F.
    Tang J.
    Zhao Y.
    Li J.
    Zang L.
    Chen Y.
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2020, 31 (08): : 898 - 906
  • [26] Investigation of plastic flow of rail vehicle wheels and its effects on rolling contact fatigue based on a dynamic method
    Bo, Wang
    Qing, Wu
    Luo, Shuihui
    Spiryagin, Maksym
    Kaikai, Lyu
    Ma, Weihua
    ENGINEERING FAILURE ANALYSIS, 2024, 163
  • [27] Influence of Specimen Geometry and Notch on Fatigue Lifetime and Fracture Behavior of Aluminum-based Nanocomposite Under Stress-controlled Fully-reversed Bending Loads
    Mohammadi, Farhad
    Azadi, Mohammad
    Parast, Mohammad Saedgh Aghareb
    RECENT PATENTS ON NANOTECHNOLOGY, 2024, 18 (01) : 72 - 87
  • [28] Estimation of total fatigue life for in-service asphalt mixture based on accelerated pavement testing and four-point bending beam fatigue tests
    Ma, Zexin
    Liu, Liping
    Yuan, Yu
    Sun, Lijun
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 2019, 46 (07) : 557 - 566
  • [29] Investigation on rail corrugation grinding criterion based on coupled vehicle-track dynamics and rolling contact fatigue model
    Liang, Hongqin
    Li, Wei
    Zhou, Zhijun
    Wen, Zefeng
    Li, Shaoguang
    An, Dong
    JOURNAL OF VIBRATION AND CONTROL, 2022, 28 (9-10) : 1176 - 1186
  • [30] Investigation on fatigue performance of adhesively bonded butt-joints and multiaxial life estimation using stress-based failure models
    Zhang, Jun
    Li, Hai-Yu
    Li, Hui
    Jia, Hong
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 107
12345