ADSORPTION CHARACTERISTICS OF USED CEMENT FOR PHOSPHORUS REMOVAL FROM WASTEWATER

被引：0

作者：

Jia, Chenrong ^{[1
,3
]}

Dai, Yanran ^{[1
,3
]}

Wu, Chunyun ^{[2
]}

Wu, Zhen-bin ^{[1
]}

Liang, Wei ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Hydrobiol, State Key Lab Freshwater Ecol & Biotechnol, Wuhan 430072, Peoples R China

[2] Wuhan Univ Technol, Sch Sci, Dept Chem, Wuhan 430070, Peoples R China

[3] Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China

来源：

FRESENIUS ENVIRONMENTAL BULLETIN | 2013年 / 22卷 / 10期

基金：

中国国家自然科学基金;

关键词：

used cement; phosphorus (P); adsorption; influencing factors; PHOSPHATE REMOVAL; AQUEOUS-SOLUTIONS; FLY-ASH; ADSORBENT; SEDIMENTS; SORPTION; SLUDGE; CHINA; LAKES; IONS;

D O I：

暂无

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Phosphorus (P) is regarded to be one of the most important causes for the eutrophication in freshwater bodies. The removal technique of P from wastewater and water-bodies has become a hot topic in the world. In this paper, used cement was chosen as the experimental material, and the effects of main influencing factors, such as dosage, temperature, pH and vibration time, on P adsorption characteristics were evaluated. Results showed that P can be effectively removed using cement powders, and the optimal cement dosages were 0.6, 1.4 and 5 g/L in the presence of 5, 10 and 50 mg phosphate concentration per L, respectively. A significant linear correlation (R-2 = 0.9872) between P concentration and optimal cement dosage was observed. The optimal conditions were determined to be: cement dosage 3 g/L, temperature 25 degrees C and vibration time 8 h. The maximum adsorptive capacity of cement was 7.93 mg P/g with an initial phosphate concentration of 25 mg P/L.

引用

页码：2910 / 2915

页数：6