Effect of Mo content on microstructure and Wear resistance of Mo-Fe-B claddings

被引:24
作者
Jin, Jun [1 ]
Sun, Junsheng [1 ]
Wang, Guangle [1 ]
机构
[1] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China
关键词
Mo2FeB2; Mo content; Microstructure; Thermodynamic calculations; Wear resistance; MECHANICAL-PROPERTIES; CERMETS;
D O I
10.1016/j.ijrmhm.2019.02.028
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Mo-Fe-B alloy powder blocks were designed and prepared to produce claddings with Mo2FeB2 phase on Q235 steel using an argon arc welding process. The effects of Mo content on microstructure, phase chemistry, microhardness and wear resistance of claddings were systematically studied. In addition, the formation conditions of hard phase were theoretically analyzed by thermodynamic calculations. The results showed that the claddings consisted of Mo2FeB2, Cr2B3, MoB and Fe-Cr. Additionally, calculated results revealed that the Mo2FeB2 can stably exist in the high- temperature liquid phase and has good thermodynamic stability. Moreover, the maximum microhardness value of claddings was about 1052 HV0.5. The claddings with 30% and 25% Mo contents had better wear resistance.
引用
收藏
页码:233 / 241
页数:9
相关论文
共 32 条
[21]   Feasibility of preparing Mo2FeB2-based cermet coating by electrospark deposition on high speed steel [J].
Wei, Xiang ;
Chen, Zhiguo ;
Zhong, Jue ;
Xiang, Yong .
SURFACE & COATINGS TECHNOLOGY, 2016, 296 :58-64
[22]   Microstructure, mechanical and tribological properties of Mo2FeB2 based cermets with Mn addition [J].
Yang, Fenghao ;
Wu, Youzhi ;
Han, Jiesheng ;
Meng, Junhu .
JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 665 :373-380
[23]   Synthesis and microstructure evolution during vacuum sintering of Mo2FeB2 based cermets [J].
Yu, Haizhou ;
Liu, Wenjun ;
Feng, Ping ;
Zheng, Yong .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 45 :48-52
[24]   Effect of carbon content on the microstructure and mechanical properties of Mo2FeB2 based cermets [J].
Yu, Haizhou ;
Liu, Wenjun ;
Zheng, Yong .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2011, 29 (06) :724-728
[25]   Microstructure and mechanical properties of liquid phase sintered Mo2FeB2 based cermets [J].
Yu, Haizhou ;
Liu, Wenjun ;
Zheng, Yong .
MATERIALS & DESIGN, 2011, 32 (06) :3521-3525
[26]   Effect of Mo/B atomic ratio on the microstructure and mechanical properties of Mo2FeB2 based cermets [J].
Yu, Haizhou ;
Zheng, Yong ;
Liu, Wenjun ;
Pang, Xuming ;
Zheng, Jianzhi ;
Xiong, Weihao .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2010, 28 (03) :338-342
[27]   Effect of V content on the microstructure and mechanical properties of Mo2FeB2 based cermets [J].
Yu, Haizhou ;
Zheng, Yong ;
Liu, Wenjun ;
Zheng, Jianzhi ;
Xiong, Weihao .
MATERIALS & DESIGN, 2010, 31 (05) :2680-2683
[28]   Effect of Mn content on the microstructure and mechanical properties of Mo2FeB2 based cermets [J].
Yu, Haizhou ;
Zheng, Yong ;
Liu, Wenjun ;
Zheng, Jianzhi ;
Xiong, Weihao .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2010, 28 (02) :286-290
[29]   Microstructures and mechanical properties of Mo2FeB2-based cermets prepared by two-step sintering technique [J].
Zhang, Jiajie ;
Zheng, Yong ;
Chen, Jixin ;
Zhou, Wei ;
Zhao, Yijie ;
Feng, Ping .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2018, 72 :56-62
[30]  
[赵丽 Zhao Li], 2016, [表面技术, Surface Technology], V45, P106