Both linear and nonlinear behaviors of soil deposits were evaluated by strong and weak motion data observed on the surface and at depths of 6, 11, 17, 47 m at the Large Scale Seismic Test (LSST) array in Lotung, Taiwan. The soil properties measured by well logging and by the shear wave velocity profile measured by uphole and cross-hole methods are available. Both one-dimensional equivalent-linear method and nonlinear method are used for the evaluation have been used. The synthetic records at various depths are obtained by using the records at the bottom as input motion. These synthetic records are then compared with actual records at corresponding depths. Records of 13 earthquakes are used. We find that the synthetic records obtained from a linear model match well with actual records for small input motions, but the results obtained from a nonlinear model match poorly. On the other hand, the synthetic records using both the nonlinear model and equivalent-linear model are in good agreement with the observed records for large input motions. In these cases, the predicted response spectra using the linear model consistently overestimate the observed records. The threshold distinguishing the large and small input motions is 0.04 g at depth of 47 m for the LSST data. Thus, the nonlinearity started at 0.04 g and occurred unequivocally at 0.075 g. Furthermore, the dominant frequencies shift toward lower values when input motions become large. Clearly, the observed records at the LSST site manifest nonlinearity of soil response. The hysteresis loops evaluated by the nonlinear method show a permanent strain of about 0.01% in soil layers at higher ground motion input levels in this case. (c) 2005 Elsevier Ltd. All rights reserved.
