Preparation of high surface area-activated carbon from lignin of papermaking black liquor by KOH activation for Ni(II) adsorption

被引：192
作者：
Gao, Yuan [1 ]
Yue, Qinyan [1 ]
Gao, Baoyu [1 ]
Sun, Yuanyuan [1 ]
Wang, Wenyu [1 ]
Li, Qian [1 ]
Wang, Yan [1 ]
机构：
[1] Shandong Univ, Sch Environm Sci & Engn, Shandong Prov Key Lab Water Pollut Control & Reso, Jinan 250100, Peoples R China
来源：
CHEMICAL ENGINEERING JOURNAL | 2013年 / 217卷
关键词：
Black liquor lignin-activated carbon; High specific area; Nickle; Adsorption; HEAVY-METAL IONS; AQUEOUS-SOLUTIONS; CHEMICAL ACTIVATION; PEANUT HULL; REMOVAL; EQUILIBRIUM; KINETICS; MICROWAVE; MECHANISM; ADSORBENT;
D O I：
10.1016/j.cej.2012.09.038
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
Low-cost activated carbon with high surface area was prepared from lignin of papermaking black liquor (BL) by KOH activation with pre-carbonization method. The effects of lignin/KOH ratio, activation temperature and activation time on the BET surface area were investigated. In addition, the adsorption capacity of Ni(II) on BLAC was also studied. Through BET surface area, scanning electron microscopy, Fourier transformed infrared spectroscopy and thermo gravimetric analysis, the BL-activated carbon (BLAC) was discovered to have porous structure with a high surface area up to 2943 m(2)/g. The results showed that the lignin/KOH ratio was the main factor influencing the surface area and the maximum surface area activated carbon was obtained at lignin/KOH ratio of 3:1, the activation temperature of 750 degrees C and the activation time of 1 h. The sorption experiments indicated that the pseudo-second-order model was well fitted the kinetic data and the adsorption equilibrium data were better simulated by Langmuir model. The adsorption ability of Ni(II) increased with increasing pH, indicating the electrostatic attraction mechanism. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：345 / 353
页数：9
相关论文
共 33 条
[11]   Insights into the modeling of adsorption isotherm systems [J].
Foo, K. Y. ;
Hameed, B. H. .
CHEMICAL ENGINEERING JOURNAL, 2010, 156 (01) :2-10
[12]   Utilization of powdered peanut hull as biosorbent for removal of anionic dyes from aqueous solution [J].
Gong, RM ;
Ding, Y ;
Lie, M ;
Yang, C ;
Liu, HJ ;
Sun, YZ .
DYES AND PIGMENTS, 2005, 64 (03) :187-192
[13]   Use of rice husk-based porous carbon for adsorption of Rhodamine B from aqueous solutions [J].
Guo, YP ;
Zhao, JZ ;
Zhang, H ;
Yang, SF ;
Qi, JR ;
Wang, ZC ;
Xu, HD .
DYES AND PIGMENTS, 2005, 66 (02) :123-128
[14]   Fabrication of activated carbons with well-defined macropores derived from sulfonated poly(divinylbenzene) networks [J].
Hasegawa, George ;
Kanamori, Kazuyoshi ;
Nakanishi, Kazuki ;
Hanada, Teiichi .
CARBON, 2010, 48 (06) :1757-1766
[15]   Preparation of activated carbon from lignin by chemical activation [J].
Hayashi, J ;
Kazehaya, A ;
Muroyama, K ;
Watkinson, AP .
CARBON, 2000, 38 (13) :1873-1878
[16]   Comparative study on characterization of activated carbons prepared by microwave and conventional heating methods and application in removal of oxytetracycline (OTC) [J].
Huang, Lihui ;
Sun, Yuanyuan ;
Wang, Weiliang ;
Yue, Qinyan ;
Yang, Tao .
CHEMICAL ENGINEERING JOURNAL, 2011, 171 (03) :1446-1453
[17]   Adsorption behavior of Ni (II) on lotus stalks derived active carbon by phosphoric acid activation [J].
Huang, LiHui ;
Sun, YuanYuan ;
Yang, Tao ;
Li, Li .
DESALINATION, 2011, 268 (1-3) :12-19
[18]   Nickel(II) adsorption onto biomass based activated carbon obtained from sugarcane bagasse pith [J].
Krishnan, K. Anoop ;
Sreejalekshmi, K. G. ;
Baiju, R. S. .
BIORESOURCE TECHNOLOGY, 2011, 102 (22) :10239-10247
[19]   Understanding chemical reactions between carbons and NaOH and KOH -: An insight into the chemical activation mechanism [J].
Lillo-Ródenas, MA ;
Cazorla-Amorós, D ;
Linares-Solano, A .
CARBON, 2003, 41 (02) :267-275
[20]   Removal of cephalexin from aqueous solutions by original and Cu(II)/Fe(III) impregnated activated carbons developed from lotus stalks Kinetics and equilibrium studies [J].
Liu, Hai ;
Liu, Weifeng ;
Zhang, Jian ;
Zhang, Chenglu ;
Ren, Liang ;
Li, Ye .
JOURNAL OF HAZARDOUS MATERIALS, 2011, 185 (2-3) :1528-1535
1234