Stress concentration factors in tubular T/Y-joints strengthened with FRP subjected to compressive load in offshore structures

被引：78

作者：

Nassiraei, Hossein ^{[1
]}

Rezadoost, Pooya ^{[1
]}

机构：

[1] Univ Guilan, Dept Civil Engn, Fac Engn, Guilan, Iran

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2020年 / 140卷

关键词：

Stress concentration factor; Tubular T/Y-joint; FRP; Parametric study; Design equations; T-JOINTS; STATIC STRENGTH; Y-JOINTS; WELD TOE; BRACE; PREDICTION; INTERSECTION; BEHAVIOR; DESIGN; STRAIN;

D O I：

10.1016/j.ijfatigue.2020.105719

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, the stress concentration factors (SCFs) in tubular T/Y-joints reinforced with fiber reinforced polymer (FRP) are investigated. A total of 134 3-D FE models was generated and analyzed under compressive load. The effect of FRP layers and joint geometry on the SCFs and the SCF ratio of the reinforced to the unreinforced joints were investigated through a parametric study. Results showed that the SCF of an FRP reinforced T/Y-joint can be down to 34% of the SCF of the corresponding unreinforced joint. Also, two parametric formulas were proposed for determining the SCFs in T/Y-joints reinforced with FRP.

引用

页数：16

共 46 条

[1]

Aaghaakouchak AA, 1990, P 9 INT C OFFSH MECH, VIII, P321

[2] Retrofitting tubular steel T-joints subjected to axial compression in chord and brace members using bonded FRP plates or through-wall steel bolts [J].