Preparation and characterization of new cobalt-free cathode Pr0.5Sr0.5Fe0.8Cu0.2O3-δ for IT-SOFC

被引:57
作者
Lu, Jun [1 ]
Yin, Yi-Mei [1 ]
Ma, Zi-Feng [1 ]
机构
[1] Shanghai Jiao Tong Univ, Inst Electrochem & Energy Technol, Dept Chem Engn, Shanghai 200240, Peoples R China
关键词
Solid oxide fuel cell; Cobalt free cathode; Intermediate temperature; Perovskite; Pr0.5Sr0.5Fe0.8Cu0.2O3-delta; OXIDE FUEL-CELLS; PEROVSKITE OXIDE; TEMPERATURE; BA0.5SR0.5FE0.8CU0.2O3-DELTA; PERFORMANCE; ELECTRODES;
D O I
10.1016/j.ijhydene.2013.05.164
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A new cobalt-free perovskite oxide Pr0.5Sr0.5Fe0.8Cu0.2O3-delta (PSFC) has been synthesized and evaluated as cathode material for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The chemical compatibility of PSFC with Sm0.2Ce0.8O1.9 (SDC) electrolyte has be proven by XRD, and its electrical conductivity reaches the maximum value of 264.1 S cm(-1) at 475 degrees C. Symmetrical cells with the configuration of PSFC/SDC/PSFC are used for the impedance study and the polarization resistance (Rp) of PSFC cathode is as low as 0.050 Omega cm(2) at 700 degrees C. Single cells, consisting of Ni-YSZ/YSZ/SDC/PSFC structure, are assembled and tested from 550 degrees C to 800 degrees C with wet hydrogen (similar to 3% H2O) as fuel and static air as oxidant. A maximum power density of 1077 mW cm(-2) is obtained at 800 degrees C. All the results suggest that the cobalt-free perovskite oxide PSFC is a very promising cathode material for application in IT-SOFC. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:10527 / 10533
页数:7
相关论文
共 24 条
[1]   Impedance spectroscopic study on well-defined (La,Sr)(Co,Fe)O3-δ model electrodes [J].
Baumann, Frank S. ;
Fleig, Juergen ;
Habermeier, Hanns-Ulrich ;
Maier, Joachim .
SOLID STATE IONICS, 2006, 177 (11-12) :1071-1081
[2]   Dense ceramic membranes for methane conversion [J].
Bouwmeester, HJM .
CATALYSIS TODAY, 2003, 82 (1-4) :141-150
[3]   Intermediate temperature solid oxide fuel cells [J].
Brett, Daniel J. L. ;
Atkinson, Alan ;
Brandon, Nigel P. ;
Skinner, Stephen J. .
CHEMICAL SOCIETY REVIEWS, 2008, 37 (08) :1568-1578
[4]   Impact of synthesis technique on the structure and electrochemical characteristics of Pr0.6Sr0.4Co0.2Fe0.8O3-δ (PSCF) cathode material [J].
Guo, Ya-Qin ;
Yin, Yi-Mei ;
Tong, Ze ;
Yin, Jie-Wei ;
Xiong, Ming-Wen ;
Ma, Zi-Feng .
SOLID STATE IONICS, 2011, 193 (01) :18-22
[5]   A study of Pr0.7Sr0.3Fe1-xNixO3-δ as a cathode material for SOFCs with intermediate operating temperature [J].
Hashimoto, SI ;
Kammer, K ;
Larsen, PH ;
Poulsen, FW ;
Mogensen, M .
SOLID STATE IONICS, 2005, 176 (11-12) :1013-1020
[6]   Enhanced performance of nanocrystalline Cu-doped Pr0.6Sr0.4FeO3 as cathode for solid oxide fuel cell [J].
Hassan, M. Shamshi ;
Yang, O-Bong .
SOLID STATE COMMUNICATIONS, 2013, 156 :59-63
[7]   Cobalt-free perovskite Ba0.5Sr0.5Fe0.9Nb0.1O3-δ as a cathode material for intermediate temperature solid oxide fuel cells [J].
Huang, Shouguo ;
Wang, Guojing ;
Sun, Xiaohong ;
Lei, Changmei ;
Li, Teng ;
Wang, Chunchang .
JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 543 :26-30
[8]   DOPED PRMNO3 PEROVSKITE OXIDE AS A NEW CATHODE OF SOLID OXIDE FUEL-CELLS FOR LOW-TEMPERATURE OPERATION [J].
ISHIHARA, T ;
KUDO, T ;
MATSUDA, H ;
TAKITA, Y .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1995, 142 (05) :1519-1524
[9]   Investigation of cobalt-free cathode material Sm0.5Sr0.5Fe0.8Cu0.2O3-δ for intermediate temperature solid oxide fuel cell [J].
Ling, Yihan ;
Zhao, Ling ;
Lin, Bin ;
Dong, Yingchao ;
Zhang, Xiaozhen ;
Meng, Guangyao ;
Liu, Xingqin .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (13) :6905-6910
[10]   Fabrication and characterization of functionally-graded LSCF cathodes by tape casting [J].
Liu, Ze ;
Liu, Mingfei ;
Nie, Lifang ;
Liu, Meilin .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2013, 38 (02) :1082-1087