A simple mix design method for structural lightweight aggregate concrete

Current design methods for structural lightweight aggregate concrete (SLWAC) are usually only valid for a limited range of concrete compositions that have previously been subjected to trial tests. The SLWAC mix design is more complex than that of normal weight concrete as more parameters need to be determined. Taking this into account, a simplified design method is proposed for SLWAC made with natural sand. The major advantages of the proposed method are that it is easy to apply and it can be generalized to any type of lightweight aggregate (LWA). For this, three additional design parameters are needed: the strength of LWA in concrete; the limit strength; the SLWAC potential strength. At most, two experimental mixtures are needed to determine these parameters. A biphasic model to estimate the strength of SLWAC is evaluated and high correlations are obtained. The good performance of the suggested method is demonstrated by examples of practical application and by the comparison with experimental results reported by the authors and other investigators.