POROUS CERAMIC - METAL COMPOSITES OBTAINED BY INFILTRATION METHODS

被引：0
作者：
Boczkowska, A. [1 ]
Chabera, P. [1 ]
Dolata, A. J. [2 ]
Dyzia, M. [2 ]
Ozieblo, A. [3 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, Warsaw, Poland
[2] Silesian Tech Univ, Fac Mat Sci & Met, Katowice, Poland
[3] Inst Ceram & Construct Mat, Katowice, Poland
来源：
METALURGIJA | 2013年 / 52卷 / 03期
关键词：
porous ceramics; cast aluminum alloy; composite; pressure infiltration; PRESSURELESS INFILTRATION;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A pressure-vacuum infiltration (T = 720 degrees C, p = 15 MPa, t = 15 min) and gas-pressure infiltration (GPI) in an autoclave (T = 700 degrees C, p=4 MPa, t=5 min) were applied for infiltration of porous Al2O3 ceramics by cast aluminum alloy. Effect of the method of the infiltration on the microstructure and mechanical properties of ceramic-metal composites, was studied. Ceramic preforms were formed by method of copying the cellular structure of the polymer matrix. The results of the X-ray tomography proved very good infiltration of the pores by the metal for each method.
引用
收藏
页码：345 / 348
页数：4
相关论文
共 50 条
  • [41] The influence of powder particle size on microstructural evolution of metal-ceramic composites
    Chen, ZC
    Takeda, T
    Ikeda, K
    Murakami, T
    SCRIPTA MATERIALIA, 2000, 43 (12) : 1103 - 1109
  • [42] Thermal conductivity of ceramic/metal composites from preforms produced by freeze casting
    Hautcoeur, D.
    Lorgouilloux, Y.
    Leriche, A.
    Gonon, M.
    Nait-Ali, B.
    Smith, D. S.
    Lardot, V.
    Cambier, F.
    CERAMICS INTERNATIONAL, 2016, 42 (12) : 14077 - 14085
  • [43] Processing of Al-SiCp metal matrix composites by pressureless infiltration of SiCp preforms
    Pech-Canul, MI
    Makhlouf, MM
    JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, 2000, 8 (01) : 35 - 53
  • [44] Multiscale homogenization models for the elastic behaviour of metal/ceramic composites with lamellar domains
    Ziegler, Tobias
    Neubrand, Achim
    Piat, Romana
    COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (04) : 664 - 670
  • [45] Effects of porosity and pore size on the properties of AgO-decorated porous diatomite ceramic composites
    Shen, Wenning
    Feng, Lajun
    Lei, Ali
    Liu, Zheng
    Chen, Yuanqing
    CERAMICS INTERNATIONAL, 2014, 40 (01) : 1495 - 1502
  • [46] Preparation of carbon nanotubes/diatomite based porous ceramic composites and its photothermal evaporation performance
    Li M.
    Wei N.
    Xu R.
    Yang Z.
    Cui H.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (08): : 4577 - 4586
  • [47] Novel porous ceramic sheet supported metal reactors for continuous-flow catalysis
    Jin, Qijie
    Lu, Bingxu
    Pan, Youchun
    Tao, Xingjun
    Himmelhaver, Cindy
    Shen, Yuesong
    Gu, Sasa
    Zeng, Yanwei
    Li, XiuJun
    CATALYSIS TODAY, 2020, 358 (358) : 324 - 332
  • [48] Porous SiC ceramic obtained by spark plasma sintering of preceramic paper: Microstructure, mechanical properties and gas permeability
    Sedanova, E. P.
    Kashkarov, E. B.
    Lider, A. M.
    Travitzky, N.
    CERAMICS INTERNATIONAL, 2024, 50 (08) : 12950 - 12959
  • [49] Tribological studies of polymer based ceramic-metal composites processed at ambient temperature
    Krishna, K. Gopala
    Divakar, C.
    Venkatesh, K.
    Mohan, C. B.
    Lohith, K. S. Mahesh
    WEAR, 2009, 266 (7-8) : 878 - 883
  • [50] Fabrication and characterization of nacre-inspired metal/ceramic composites containing AlN nanowhiskers
    Shi, Guodong
    Tian, Xiaoxiao
    Wang, Hengli
    Liu, Xin
    Wu, Zhanjun
    CERAMICS INTERNATIONAL, 2025, 51 (01) : 1161 - 1171
12345