POROUS CERAMIC - METAL COMPOSITES OBTAINED BY INFILTRATION METHODS

被引：0
作者：
Boczkowska, A. [1 ]
Chabera, P. [1 ]
Dolata, A. J. [2 ]
Dyzia, M. [2 ]
Ozieblo, A. [3 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, Warsaw, Poland
[2] Silesian Tech Univ, Fac Mat Sci & Met, Katowice, Poland
[3] Inst Ceram & Construct Mat, Katowice, Poland
来源：
METALURGIJA | 2013年 / 52卷 / 03期
关键词：
porous ceramics; cast aluminum alloy; composite; pressure infiltration; PRESSURELESS INFILTRATION;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A pressure-vacuum infiltration (T = 720 degrees C, p = 15 MPa, t = 15 min) and gas-pressure infiltration (GPI) in an autoclave (T = 700 degrees C, p=4 MPa, t=5 min) were applied for infiltration of porous Al2O3 ceramics by cast aluminum alloy. Effect of the method of the infiltration on the microstructure and mechanical properties of ceramic-metal composites, was studied. Ceramic preforms were formed by method of copying the cellular structure of the polymer matrix. The results of the X-ray tomography proved very good infiltration of the pores by the metal for each method.
引用
收藏
页码：345 / 348
页数：4
相关论文
共 50 条
  • [31] Interfacial energy issues in ceramic particulate reinforced metal matrix composites
    Dhindaw, BK
    BULLETIN OF MATERIALS SCIENCE, 1999, 22 (03) : 665 - 669
  • [32] Interfacial energy issues in ceramic particulate reinforced metal matrix composites
    Brij K Dhindaw
    Bulletin of Materials Science, 1999, 22 : 665 - 669
  • [33] On the elastic deformation properties of porous ceramic materials obtained by pore-forming agent method
    Pia, Giorgio
    Casnedi, Ludovica
    Ionta, Matteo
    Sanna, Ulrico
    CERAMICS INTERNATIONAL, 2015, 41 (09) : 11097 - 11105
  • [34] Ultrafine silver(II) oxide particles decorated porous ceramic composites for water treatment
    Shen, Wenning
    Feng, Lajun
    Feng, Hui
    Kong, Zhenzhen
    Guo, Meijuan
    CHEMICAL ENGINEERING JOURNAL, 2011, 175 : 592 - 599
  • [35] APPLICATION OF CERAMIC INJECTION MOULDING AND PRESSURE INFILTRATION TO THE MANUFACTURING OF ALUMINA/AlSi10Mg COMPOSITES
    Matula, G.
    Krzysteczko-Witek, J.
    Tomiczek, B.
    ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (04) : 2101 - 2106
  • [36] Dynamic Compressive Properties of Porous SiC Ceramic/Zr-Based Amorphous Composites
    Shen Yonghua
    Zhang Yuping
    Cheng Huanwu
    Wang Yangwei
    Wang Yingchun
    Li Shuo
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (02) : 737 - 743
  • [37] Fabrication of porous alumina-zirconia ceramics by gel-casting and infiltration methods
    Liu, Ruiping
    Li, Yutao
    Wang, Chang-An
    Tie, Shengnian
    MATERIALS & DESIGN, 2014, 63 : 1 - 5
  • [38] Infiltration kinetics of pressureless infiltration in SiCp/Al composites
    秦振凯
    于家康
    张小宇
    TransactionsofNonferrousMetalsSocietyofChina, 2005, (02) : 371 - 374
  • [39] Effect of bentonite addition on fabrication of reticulated porous SiC ceramics for liquid metal infiltration
    Soy, Ugur
    Demir, Adem
    Caliskan, Fatih
    CERAMICS INTERNATIONAL, 2011, 37 (01) : 15 - 19
  • [40] Infiltration kinetics of pressureless infiltration in SiCp/Al composites
    Qin, ZK
    Yu, JK
    Zhang, XY
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (02) : 371 - 374
12345