Induced drilling strains in glass fibre reinforced epoxy composites

被引：16
|
作者：
Nobre, J. P. [1 ,2 ]
Stiffel, J. -H. [2 ]
Nau, A. [3 ]
Outeiro, J. C.
Batista, A. C. [1 ]
Van Paepegem, W. [4 ]
Scholtes, B. [3 ]
机构：
[1] Univ Coimbra, Dept Phys, CEMDRX, P-3030728 Coimbra, Portugal
[2] Univ Coimbra, Dept Mech Engn, P-3030728 Coimbra, Portugal
[3] Univ Kassel, Inst Mat Engn, IfW, D-34109 Kassel, Germany
[4] Univ Ghent, Dept Mat Sci & Engn, B-9052 Ghent, Belgium
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2013年 / 62卷 / 01期
关键词：
Drilling; Composite; Residual stress; RESIDUAL-STRESS; ORTHOTROPIC MATERIALS;
D O I：
10.1016/j.cirp.2013.03.089
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Residual strains induced by drilling of glass-fibre reinforced polymers (GFRPs) were determined using a hybrid experimental-numerical methodology. Experimentally, a set of GFRP specimens were drilled under well-defined tensile (calibration) stresses, using an especially designed tensile test device. To remove the effect of the initial residual stresses, this methodology considers differential stress values instead of absolute ones. Numerically, the experimental procedure was simulated using the finite element method. The induced drilling strains were determined by comparing the experimental measured strains with those calculated numerically. Clear differences between the selected drilling operations could be observed and evaluated. (C) 2013 CIRP.
引用
收藏
页码：87 / 90
页数：4
相关论文
共 50 条
  • [41] The fracture of glass-fibre-reinforced epoxy composites using nanoparticle-modified matrices
    A. J. Kinloch
    K. Masania
    A. C. Taylor
    S. Sprenger
    D. Egan
    Journal of Materials Science, 2008, 43 : 1151 - 1154
  • [42] Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites
    Gao, SL
    Mäder, E
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (04) : 559 - 576
  • [43] Low velocity impact response and energy absorption behavior on glass fibre reinforced epoxy composites
    SHEN YiOu
    JIANG Bing
    LI Yan
    JIANG Xu
    Science China(Technological Sciences), 2017, (09) : 1339 - 1346
  • [44] Coloured glass-fibre reinforced composites
    Sardar Patel Univ, Gujarat, India
    Int J Polym Mater, 1-2 (23-29):
  • [45] The effect of matrix treatment and SiCp addition on the mechanical behaviour of glass fibre reinforced epoxy composites
    Benham, A.
    Kumar, K. K. Ajith
    Vettivel, S. C.
    Pandian, M. S. Siva
    Paul, C. S. Golden
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 7029 - 7036
  • [46] INFLUENCE OF BIODIESEL AND BLENDED FUELS ON THE TENSILE AND COMPRESSIVE PROPERTIES OF GLASS FIBRE REINFORCED EPOXY COMPOSITES
    Kumarasamy, S.
    Mazlan, Nurul Musfirah
    Abidin, M. Shukur Zainol
    Anjang, A.
    JURNAL TEKNOLOGI, 2020, 82 (01): : 41 - 47
  • [47] Ceramic particulate thermal barrier surface coatings for glass fibre-reinforced epoxy composites
    Luangtriratana, Piyanuch
    Kandola, Baljinder K.
    Myler, Peter
    MATERIALS & DESIGN, 2015, 68 : 232 - 244
  • [48] Low velocity impact response and energy absorption behavior on glass fibre reinforced epoxy composites
    YiOu Shen
    Bing Jiang
    Yan Li
    Xu Jiang
    Science China Technological Sciences, 2017, 60 : 1339 - 1346
  • [49] The fracture of glass-fibre-reinforced epoxy composites using nanoparticle-modified matrices
    Kinloch, A. J.
    Masania, K.
    Taylor, A. C.
    Sprenger, S.
    Egan, D.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (03) : 1151 - 1154
  • [50] Electrostatic dissipative glass fibre reinforced composites
    Gloria-Esparza, C
    Yuan, Q
    Bateman, S
    Xia, K
    FRACTURE OF MATERIALS: MOVING FORWARDS, 2006, 312 : 123 - 126
12345