Induced drilling strains in glass fibre reinforced epoxy composites

被引：16
|
作者：
Nobre, J. P. [1 ,2 ]
Stiffel, J. -H. [2 ]
Nau, A. [3 ]
Outeiro, J. C.
Batista, A. C. [1 ]
Van Paepegem, W. [4 ]
Scholtes, B. [3 ]
机构：
[1] Univ Coimbra, Dept Phys, CEMDRX, P-3030728 Coimbra, Portugal
[2] Univ Coimbra, Dept Mech Engn, P-3030728 Coimbra, Portugal
[3] Univ Kassel, Inst Mat Engn, IfW, D-34109 Kassel, Germany
[4] Univ Ghent, Dept Mat Sci & Engn, B-9052 Ghent, Belgium
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2013年 / 62卷 / 01期
关键词：
Drilling; Composite; Residual stress; RESIDUAL-STRESS; ORTHOTROPIC MATERIALS;
D O I：
10.1016/j.cirp.2013.03.089
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Residual strains induced by drilling of glass-fibre reinforced polymers (GFRPs) were determined using a hybrid experimental-numerical methodology. Experimentally, a set of GFRP specimens were drilled under well-defined tensile (calibration) stresses, using an especially designed tensile test device. To remove the effect of the initial residual stresses, this methodology considers differential stress values instead of absolute ones. Numerically, the experimental procedure was simulated using the finite element method. The induced drilling strains were determined by comparing the experimental measured strains with those calculated numerically. Clear differences between the selected drilling operations could be observed and evaluated. (C) 2013 CIRP.
引用
收藏
页码：87 / 90
页数：4
相关论文
共 50 条
  • [21] Blast response of Hollow glass (H-glass) fibre reinforced epoxy matrix composites
    Reddy, C. Jayarami
    Venkataramudu, B.
    Rao, G. Seshagiri
    Reddy, K. Gopinadha
    Kumar, Rajesh
    Singh, Ranjit Kumar
    Madhu, V.
    2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND EXHIBITION 2018 (SICE 2018), 2019, 14 : 634 - 641
  • [22] Fretting of glass fibre reinforced composites
    Daoud, M
    Chateauminois, A
    Vincent, L
    JOURNAL OF MATERIALS SCIENCE, 1999, 34 (01) : 191 - 194
  • [23] Fretting of glass fibre reinforced composites
    M. Daoud
    A. Chateauminois
    L. Vincent
    Journal of Materials Science, 1999, 34 : 191 - 194
  • [24] Hole integrity of carbon fibre reinforced epoxy composites using combined punching and drilling techniques
    M. S. Abdullah
    A. B. Abdullah
    Z. Samad
    The International Journal of Advanced Manufacturing Technology, 2020, 110 : 2517 - 2527
  • [25] Hole integrity of carbon fibre reinforced epoxy composites using combined punching and drilling techniques
    Abdullah, M. S.
    Abdullah, A. B.
    Samad, Z.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (9-10): : 2517 - 2527
  • [26] Visualization of the morphology at the interphase of glass fibre reinforced epoxy-thermoplastic polymer composites
    Olmos, D.
    Gonzalez-Benito, J.
    EUROPEAN POLYMER JOURNAL, 2007, 43 (04) : 1487 - 1500
  • [27] Mechanical and electrical performance of Roystonea regia/glass fibre reinforced epoxy hybrid composites
    GOVARDHAN GOUD
    R N RAO
    Bulletin of Materials Science, 2012, 35 : 595 - 599
  • [28] Tensile and fatigue properties of Jute-Glass hybrid fibre reinforced epoxy composites
    Mostafa, Nawras H.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08):
  • [29] Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced composites
    Kornmann, X
    Rees, M
    Thomann, Y
    Necola, A
    Barbezat, M
    Thomann, R
    COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (14) : 2259 - 2268
  • [30] Solid particle erosion of glass fibre reinforced flyash filled epoxy resin composites
    Srivastava, V. K.
    Pawar, A. G.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (15) : 3021 - 3028
12345