Dry sliding friction and wear properties of metallic glass coating and martensite stainless coating

被引：59
|
作者：
Cheng, J. B. [1 ,2 ]
Liang, X. B. [2 ]
Wang, Z. H. [1 ]
Xu, B. S. [2 ]
机构：
[1] Hohai Univ, Coll Mech & Mat, Nanjing 210098, Jiangsu, Peoples R China
[2] Acad Armored Forces Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China
来源：
TRIBOLOGY INTERNATIONAL | 2013年 / 60卷
关键词：
Sliding wear; Thermal spray coatings; Surface analysis; Fracture; AMORPHOUS-ALLOYS; MECHANICAL-PROPERTIES; THERMAL SPRAY; BEHAVIOR; FE; RESISTANCE; STEEL; STRENGTH; VELOCITY; AL;
D O I：
10.1016/j.triboint.2012.11.010
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The wire arc spraying process was used to prepare FeB-based metallic glass coating and 3Cr13 coating. The effects of wear parameters, such as sliding distance, linear speed and normal loads, on the wear performances of the coatings were analyzed in detail. The results showed that, with increase in sliding distance, linear speed and normal loads, the volume losses of the metallic glass coatings increased. The relationships between wear behavior and microstructure of the coatings were discussed. The metallic glass coating had excellent wear resistance. The relatively wear resistance of the metallic glass coating was about 2.6 times that of the 3Cr13 coating under the same testing conditions. The main failure mechanism of the metallic glass coating was brittle failure and fracture. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：140 / 146
页数：7
相关论文
共 50 条
  • [41] On dry sliding wear of ECAPed Al-Mg-Zn alloy: Wear rate and coefficient of friction relationship
    Elhefnawey, Maged
    Shuai, G. L.
    Li, Z.
    Nemat-Alla, M.
    Zhang, D. T.
    Li, L.
    ALEXANDRIA ENGINEERING JOURNAL, 2021, 60 (01) : 927 - 939
  • [42] Effect of laser power on the structure and wear performance of laser additively manufactured Cu 45 Zr 45 Al 6 Ti 4 metallic glass coating
    Luo, Haojie
    Fan, Aoqi
    Liao, Wenhe
    Du, Yulei
    SURFACE & COATINGS TECHNOLOGY, 2024, 482
  • [43] Surface modification of ceramic coating for enhanced hydrophobicity and wear properties
    Li, Jiahong
    Wang, Jianyu
    Liu, Yaxuan
    Bian, Da
    Zhao, Yongwu
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2022, 19 (05) : 2648 - 2663
  • [44] Effects of loads on friction-wear properties of HVOF sprayed FeCrBSi coating at elevated temperatures
    Luo Yuntian
    Xu Jianyan
    Kong Dejun
    MATERIALS RESEARCH EXPRESS, 2019, 6 (09)
  • [45] Anisotropic Dry Sliding Friction and Wear Properties of a Novel Stainless Steel/ZA8 Alloy Interpenetrating Phase Composite Produced by Squeeze Casting
    Yao, Bibo
    Zhou, Zhaoyao
    Chen, Zengtao
    Wang, Junwen
    TRIBOLOGY TRANSACTIONS, 2020, 63 (03) : 543 - 556
  • [46] Friction and wear of periodically micro-patterned polypropylene in dry sliding
    Korpela, Tarmo
    Suvanto, Mika
    Pakkanen, Tuula T.
    WEAR, 2012, 289 : 1 - 8
  • [47] Coating thickness effect of metallic glass thin film on the fatigue-properties improvement of 7075 aluminum alloy
    Tsai, P. H.
    Li, T. H.
    Hsu, K. T.
    Ke, J. H.
    Jang, J. S. C.
    Chu, J. P.
    THIN SOLID FILMS, 2019, 677 : 68 - 72
  • [48] Protecting stainless steel by glass coating during slab reheating
    Liu, Peng
    Wei, Lianqi
    Ye, Shufeng
    Xu, Haiwei
    Chen, Yunfa
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (12) : 3582 - 3587
  • [49] Friction-Wear Characteristics of High Velocity Oxygen Fuel Sprayed NiCrBSi Alloy Coating at Elevated Temperatures
    Zhao, Wen
    Zhao, Benguo
    Kong, Dejun
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (10) : 2565 - 2573
  • [50] Assessments on friction and wear behaviors of P110 steel and chromizing coating sliding against two counterparts under dry and wet conditions
    Lin, Naiming
    Xie, Faqin
    Yang, Huijun
    Tian, Wei
    Wang, Hefeng
    Tang, Bin
    APPLIED SURFACE SCIENCE, 2012, 258 (11) : 4960 - 4970
12345