Dry sliding friction and wear properties of metallic glass coating and martensite stainless coating

被引：59
|
作者：
Cheng, J. B. [1 ,2 ]
Liang, X. B. [2 ]
Wang, Z. H. [1 ]
Xu, B. S. [2 ]
机构：
[1] Hohai Univ, Coll Mech & Mat, Nanjing 210098, Jiangsu, Peoples R China
[2] Acad Armored Forces Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China
来源：
TRIBOLOGY INTERNATIONAL | 2013年 / 60卷
关键词：
Sliding wear; Thermal spray coatings; Surface analysis; Fracture; AMORPHOUS-ALLOYS; MECHANICAL-PROPERTIES; THERMAL SPRAY; BEHAVIOR; FE; RESISTANCE; STEEL; STRENGTH; VELOCITY; AL;
D O I：
10.1016/j.triboint.2012.11.010
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The wire arc spraying process was used to prepare FeB-based metallic glass coating and 3Cr13 coating. The effects of wear parameters, such as sliding distance, linear speed and normal loads, on the wear performances of the coatings were analyzed in detail. The results showed that, with increase in sliding distance, linear speed and normal loads, the volume losses of the metallic glass coatings increased. The relationships between wear behavior and microstructure of the coatings were discussed. The metallic glass coating had excellent wear resistance. The relatively wear resistance of the metallic glass coating was about 2.6 times that of the 3Cr13 coating under the same testing conditions. The main failure mechanism of the metallic glass coating was brittle failure and fracture. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：140 / 146
页数：7
相关论文
共 50 条
  • [1] Dry friction and wear properties of several hard coating combinations
    Zhu, Yueying
    Qu, Huajie
    Luo, Mei
    He, Chunlei
    Qu, Jianjun
    WEAR, 2020, 456
  • [2] Dry Sliding Wear and Friction Behavior of Cu-SiC Nanocomposite Coating Prepared by Pulse Reverse Electrodeposition
    Pradhan, Ajaya K.
    Das, Siddhartha
    TRIBOLOGY TRANSACTIONS, 2014, 57 (01) : 46 - 56
  • [3] Sliding indentation, friction and fracture of a hybrid coating on glass
    Malzbender, J
    de With, G
    WEAR, 1999, 236 (1-2) : 355 - 359
  • [4] Dry sliding wear behaviors of Fe-based amorphous metallic coating synthesized by D-gun spray
    Li, Xuqiang
    Zhai, Haimin
    Li, Wensheng
    Cui, Shuai
    Ning, Weichao
    Qiu, Xiaolai
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2020, 537
  • [5] The effect of diamond like carbon coating on the wear resistance at dry sliding conditions
    Al-Asadi, Maitham Mohammed
    Al-Tameemi, Hamza A.
    MATERIALS RESEARCH EXPRESS, 2022, 9 (11)
  • [6] PLASTICITY INDEX A MEASURE OF DRY SLIDING WEAR FOR Ni-BASED COATING
    Rukhande, Sanjay W. W.
    Bhosale, Digvijay G. G.
    Rathod, Walmik S. S.
    Vasudev, Hitesh
    SURFACE REVIEW AND LETTERS, 2023,
  • [7] Dry Sliding Tribological Properties of a Dendrite-reinforced Zr-based Bulk Metallic Glass Matrix Composite
    Yang, Huijun
    Liu, Yong
    Zhang, Teng
    Wang, Hengpeng
    Tang, Bin
    Qiao, Junwei
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2014, 30 (06) : 576 - 583
  • [8] Investigation of Sliding Wear Behaviour of HVOF Carbide Coating
    Mishra, Tribhuwan Kishore
    Kumar, Arbind
    Sinha, S. K.
    Sharma, Satpal
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 19539 - 19546
  • [9] WEAR AND SLIDING-FRICTION CHARACTERISTICS OF STAINLESS STEEL SS316LN WITHOUT A COATING AND WITH A CrN COATING AT ELEVATED TEMPERATURES AND IN A VACUUM
    Raj, K. Arul
    Karthikeyan, M.
    Alphonsa, J.
    Satish, V. K.
    Venugopal, S.
    METALLURGIST, 2013, 57 (7-8) : 727 - 735
  • [10] Investigation of wear properties in dry sliding conditions on austenitic stainless steel
    Dinakar, N.
    Elansezhian, R.
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 2283 - 2286
12345