Evaluation of crack width in RC ties through a numerical "range" model

被引:3
作者
Bernardi, Patrizia [1 ]
Ferretti, Daniele [1 ]
Michelini, Elena [1 ]
Sirico, Alice [1 ]
机构
[1] Univ Parma, DICATeA, Parco Area Sci 181-A, I-43124 Parma, Italy
来源
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) | 2016年 / 2卷
关键词
RC tie; crack width; crack spacing; range model; bond-slip; CONCRETE; MEMBERS;
D O I
10.1016/j.prostr.2016.06.347
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Crack phenomenon in reinforced concrete (RC) ties is studied herein by means of a numerical "range model", based on bond between steel and concrete. Since a unique definition of the crack pattern evolution is not possible for these elements, through the definition of this "range", defined by the curves of maximum and minimum crack spacing (and consequently width), all the possible crack patterns of the considered tension member are so included. Comparisons with significant experimental results available in the technical literature prove that the proposed approach can be successfully adopted also for design purposes, since it provides a correct estimate of maximum crack width. The obtained results are compared with Codes provisions (ACI and Model Code 2010) and the effectiveness of different approaches for predicting crack width is analyzed and discussed. Copyright (C) 2016 The Authors. Published by Elsevier B.V.
引用
收藏
页码:2780 / 2787
页数:8
相关论文
共 50 条
[41]   Experimental evaluation of crack width movement of continuously reinforced concrete pavement under environmental load [J].
Oh, Han Jin ;
Cho, Young Kyo ;
Kim, Seong-Min .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 137 :85-95
[42]   Numerical determination of concrete crack width for corrosion-affected concrete structures [J].
Yang, S. T. ;
Li, K. F. ;
Li, C. Q. .
COMPUTERS & STRUCTURES, 2018, 207 :75-82
[43]   NUMERICAL MODELLING OF TEXTILE STRENGTHENED RC STRUCTURES INCLUDING A SMEARED CRACK APPROACH [J].
Steinigen, F. ;
Graf, W. ;
Kaliske, M. .
FRACTURE AND DAMAGE OF ADVANCED FIBRE-REINFORCED CEMENT-BASED MATERIALS, 2010, :223-230
[44]   Application of 2D digital image correlation for displacement and crack width measurement on RC elements [J].
Francic Smrkic, Marina ;
Koscak, Janko ;
Damjanovic, Domagoj .
GRADEVINAR, 2018, 70 (09) :771-781
[45]   Effects of crack width on chloride penetration and performance deterioration of RC columns with sustained eccentric compressive load [J].
Papa Niane Faye ;
Yinghua Ye ;
Bo Diao .
KSCE Journal of Civil Engineering, 2018, 22 :637-646
[46]   A new methodology for non-contact accurate crack width measurement through photogrammetry for automated structural safety evaluation [J].
Jahanshahi, Mohammad R. ;
Masri, Sami F. .
SMART MATERIALS AND STRUCTURES, 2013, 22 (03)
[47]   Performance study of crack width calculation methods according to Eurocodes, fib model codes and the modified tension chord model [J].
Terjesen, Otto ;
Pinto, Gianclaudio ;
Kanstad, Terje ;
Tan, Reignard .
STRUCTURAL CONCRETE, 2024, 25 (04) :2375-2399
[48]   Prediction of crack width and intermediate-crack-debonding strain of FRP bonded two-way RC slabs - a comparative and novel approach [J].
Balamurugan, G. ;
Viswanathan, T. S. .
INTERNATIONAL JOURNAL OF STRUCTURAL ENGINEERING, 2021, 11 (04) :364-386
[49]   Predicting Crack Width in CFRP-Strengthened RC One-Way Slabs Using Hybrid Grey Wolf Optimizer Neural Network Model [J].
Tosee, Seyed Vahid Razavi ;
Faridmehr, Iman ;
Nehdi, Moncef L. ;
Plevris, Vagelis ;
Valerievich, Kiyanets A. .
BUILDINGS, 2022, 12 (11)
[50]   Experimental and numerical study on the crack width and deflection performance of GFRP reinforced concrete beams [J].
Gouda, Omar ;
Hassanein, Ahmed ;
Galal, Khaled .
ENGINEERING STRUCTURES, 2023, 283