Evaluation of crack width in RC ties through a numerical "range" model

被引：3

作者：

Bernardi, Patrizia ^{[1
]}

Ferretti, Daniele ^{[1
]}

Michelini, Elena ^{[1
]}

Sirico, Alice ^{[1
]}

机构：

[1] Univ Parma, DICATeA, Parco Area Sci 181-A, I-43124 Parma, Italy

来源：

21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) | 2016年 / 2卷

关键词：

RC tie; crack width; crack spacing; range model; bond-slip; CONCRETE; MEMBERS;

D O I：

10.1016/j.prostr.2016.06.347

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Crack phenomenon in reinforced concrete (RC) ties is studied herein by means of a numerical "range model", based on bond between steel and concrete. Since a unique definition of the crack pattern evolution is not possible for these elements, through the definition of this "range", defined by the curves of maximum and minimum crack spacing (and consequently width), all the possible crack patterns of the considered tension member are so included. Comparisons with significant experimental results available in the technical literature prove that the proposed approach can be successfully adopted also for design purposes, since it provides a correct estimate of maximum crack width. The obtained results are compared with Codes provisions (ACI and Model Code 2010) and the effectiveness of different approaches for predicting crack width is analyzed and discussed. Copyright (C) 2016 The Authors. Published by Elsevier B.V.

引用

页码：2780 / 2787

页数：8

共 50 条

[21] Prediction of seismic performance levels of corroded RC frames based on crack width [J].

Turan, Ahmet Ihsan ;

Kumbasaroglu, Atila ;

Yalciner, Hakan ;

Ayaz, Yasar .

STRUCTURES, 2025, 76

[22] Experimental and numerical investigation of screw anchors in large crack width [J].

Neupane, Chandani Chandra ;

Lee, Jessey ;

Pokharel, Tilak ;

Tsang, Hing-Ho ;

Gad, Emad .

ENGINEERING STRUCTURES, 2024, 300

[23] Numerical calculation model of crack width in negative moment regions of steel-concrete composite beams [J].

Song A. ;

Li Z. ;

Xu H. ;

Wan S. ;

Zhou P. .

Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2021, 53 (03) :75-81

[24] Crack width evaluation in FRP reinforced concrete members [J].

G. Creazza ;

S. Russo .

Materials and Structures, 2001, 34 :119-125

[25] Crack width evaluation in FRP reinforced concrete members [J].

Creazza, G ;

Russo, S .

MATERIALS AND STRUCTURES, 2001, 34 (236) :119-125

[26] Probabilistic steel stress-crack width relationship in RC frames with smooth rebars [J].

Fabbrocino, Giovanni ;

Verderame, Gerardo Mario ;

Polese, Maria .

ENGINEERING STRUCTURES, 2007, 29 (01) :1-10

[27] Calculation theory and damage analysis on crack width of RC seismic-damaged columns [J].

Cheng, Shitao ;

He, Haoxiang ;

Lan, Bingji .

STRUCTURES, 2021, 34 :3329-3344

[28] Cracking behavior and crack width predictions of FRP strengthened RC members under tension [J].

Zomorodian, Mehdi ;

Yang, Guang ;

Belarbi, Abdeldjelil ;

Ayoub, Ashraf .

ENGINEERING STRUCTURES, 2016, 125 :313-324

[29] Capacity prediction and crack width calculation of RC beam strengthened with textile and modified concrete [J].

Cheng, Shitao ;

He, Haoxiang ;

Chen, Yifei ;

Lan, Bingji .

JOURNAL OF BUILDING ENGINEERING, 2023, 69

[30] Calculation Theory and Performance Analysis on Crack Width of Seismic-damaged RC Columns [J].

Cheng S. ;

He H. ;

Wu S. ;

Chen Y. .

Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis, 2023, 43 (04) :809-816and836

← 1 2 3 4 5 →