Effects of Water Vapor on the Oxidation Behaviors of Cr-Al-N Coatings

被引:0
|
作者
Zhu, Ming [1 ]
Wang, Zhi-Hua [1 ]
机构
[1] Xian Univ Sci & Technol, Coll Mat Sci & Engn, Xian 710054, Peoples R China
来源
NEW MATERIALS AND PROCESSES, PTS 1-3 | 2012年 / 476-478卷
关键词
Cr1-xAlxN coatings; high temperature oxidation; water vapor; CHROMIUM EVAPORATION; RESISTANCE; TEMPERATURE; ALLOYS; FILMS;
D O I
10.4028/www.scientific.net/AMR.476-478.2083
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Cr1-xAlxN coatings with different aluminum content were deposited on K38G alloy by reactive magnetron sputtering method. Oxidation behaviors of these coatings were investigated at 1000 degrees C in air+10 vol.% water vapor. The surface morphologies and the microstructure of the oxide scales were analyzed by SEM and XRD, respectively. The results showed that the oxidation of the Cr1-xAlxN coatings in the wet air also obeyed the parabolic law; however, compared to that in the dry air, existing of 10 vol. % water vapor increased the parabolic rate constants of the coatings. It was believed that the accelerating of the oxidation rates was owing to easily outwards diffusion of Cr through the looser and coarser oxide scales formed on the surface of the coatings when oxidized in wet air.
引用
收藏
页码:2083 / 2086
页数:4
相关论文
共 50 条
  • [31] Corrosion resistance and conductivity behavior of Cr-Al-N MAX phase coatings prepared by magnetron sputtering technology
    Su, Y. L.
    Kao, W. H.
    Horng, J. H.
    Hsueh, H. C.
    Ciana, Y. C.
    Hsieh, T. C.
    THIN SOLID FILMS, 2024, 793
  • [32] Characteristics of Cr-Al-N films prepared by pulsed laser deposition
    Suzuki, T
    Hirai, M
    Suematsu, H
    Jiang, W
    Yatsui, K
    PPPS-2001: PULSED POWER PLASMA SCIENCE 2001, VOLS I AND II, DIGEST OF TECHNICAL PAPERS, 2001, : 1838 - 1841
  • [33] Effect of number of layers on erosion, corrosion, and wear resistance of multilayer Cr-N/Cr-Al-N coatings on AISI 630 stainless steel
    Olia, H.
    Ghobadi, M.
    Danaee, Iman
    Onsori, S.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2020, 71 (08): : 1361 - 1374
  • [34] Oxidation resistance of (Ti,Al,Cr)N coatings at 800 °C
    Li Ming-sheng
    Feng Chang-jie
    Yang Gan-lan
    He Xiang-ming
    Li Wen-kui
    Xiang Jun-huai
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 : S831 - S834
  • [35] Mechanical properties and oxidation behaviour of (Al,Cr)N and (Al,Cr,Si)N coatings for cutting tools deposited by HPPMS
    Bobzin, K.
    Bagcivan, N.
    Immich, P.
    Bolz, S.
    Cremer, R.
    Leyendecker, T.
    THIN SOLID FILMS, 2008, 517 (03) : 1251 - 1256
  • [36] Effects of (Cr,Al)N and (Cr,Al,Mo)N coatings on friction under minimum quantity lubrication
    Bobzin, K.
    Broegelmann, T.
    Kalscheuer, C.
    Stahl, K.
    Lohner, T.
    Yilmaz, M.
    SURFACE & COATINGS TECHNOLOGY, 2020, 402
  • [37] Optimization of Cr-Al-N coating by multilayer architecture with TiSiN insertion layer
    Wang, Hui T.
    Xu, Yu X.
    Chen, Li
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 728 : 952 - 958
  • [38] Impact of yttrium on structure and mechanical properties of Cr-Al-N thin films
    Rovere, Florian
    Mayrhofer, Paul H.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2007, 25 (05): : 1336 - 1340
  • [39] Deposition of an adherent diamond film on stainless steel using Cr/ Cr-Al-N as an interlayer
    Li, Xiao
    Xia, Fan
    Wang, Chengcheng
    Chen, Chengke
    Jiang, Meiyan
    Pan, Jinping
    Lu, Shaohua
    Khomich, Andrey A.
    Vlasov, Igor
    Hu, Xiaojun
    SURFACE & COATINGS TECHNOLOGY, 2022, 449
  • [40] Arc evaporated Ti-Al-N/Cr-Al-N multilayer coating systems for cutting applications
    Teppernegg, T.
    Czettl, C.
    Michotte, C.
    Mitterer, C.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2018, 72 : 83 - 88