Sintering Diamond/Cemented Carbides by the Pulse Plasma Sintering Method

被引:39
作者
Michalski, Andrzej [1 ]
Rosinski, Marcin [1 ]
机构
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, Warsaw, Poland
关键词
D O I
10.1111/j.1551-2916.2008.02738.x
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Under the conditions of thermodynamic instability, we produced dense sintered composites built of diamond particles (30 vol%) and a cemented carbide matrix. The composites were consolidated by high-current electric pulses at a temperature of about 1100 degrees C and load of 75 MPa for 5 min. The diamond particles are strongly bound with the cemented carbide matrix, by a transition layer composed of a solid solution of carbon and tungsten in cobalt. No graphite precipitates were found in the sintered composites, as examined by microstructure observations, examinations of the phase composition, and an analysis of the Raman scattering spectra. The hardness of the diamond/cemented carbide was 23 GPa.
引用
收藏
页码:3560 / 3565
页数:6
相关论文
共 27 条
[1]   The wear of ultrafine WC-Co hard metals [J].
Allen, C ;
Sheen, M ;
Williams, J ;
Pugsley, VA .
WEAR, 2001, 250 :604-610
[2]   Microstructure and mechanical properties of nanocrystalline WC-10Co cemented carbides [J].
Cha, SI ;
Hong, SH ;
Ha, GH ;
Kim, BK .
SCRIPTA MATERIALIA, 2001, 44 (8-9) :1535-1539
[3]   Fundamental investigations on the spark plasma sintering/synthesis process - I. Effect of dc pulsing on reactivity [J].
Chen, W ;
Anselmi-Tamburini, U ;
Garay, JE ;
Groza, JR ;
Munir, ZA .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 394 (1-2) :132-138
[4]  
Fedoseev D.V., 1980, SURFACE, V1, P92
[5]   Phase evolution and microstructure characteristics of ultrafine Ti(C,N)-based cermet by spark plasma sintering [J].
Feng, P ;
Xiong, WH ;
Yu, LX ;
Zheng, Y ;
Xia, YH .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2004, 22 (2-3) :133-138
[6]  
Groza JR, 2003, REV ADV MATER SCI, V5, P24
[7]   Sintering activation by external electrical field [J].
Groza, JR ;
Zavaliangos, A .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 287 (02) :171-177
[8]   Preparation of a TiB2 composite with a nickel matrix by pulse plasma sintering with combustion synthesis [J].
Jaroszewicz, Jakub ;
Michalski, Andrzej .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2006, 26 (13) :2427-2430
[9]   Sintering and microstructure of nanophase WC/Co hardmetals [J].
Kim, BK ;
Ha, GH ;
Lee, DW .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 63 (1-3) :317-321
[10]   Nanocrystalline cemented carbides sintered by the pulse plasma method [J].
Michalski, A. ;
Siemiaszko, D. .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2007, 25 (02) :153-158