Joining of yttria-tetragonal stabilized zirconia polycrystals using nanocrystals

被引：29

作者：

Gutierrez-Mora, F ^{[1
]}

Domínguez-Rodríguez, A

Routbort, JL

Chaim, R

Guiberteau, F

机构：

[1] Technion Israel Inst Technol, Dept Mat Engn, IL-32000 Haifa, Israel

[2] Univ Extremadura, Dept Fis, Badajoz 61070, Spain

[3] Argonne Natl Lab, Div Energy Technol, Argonne, IL 60439 USA

来源：

SCRIPTA MATERIALIA | 1999年 / 41卷 / 05期

关键词：

bonding; ceramics; plasticity;

D O I：

10.1016/S1359-6462(99)00190-6

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This work was done to determine whether bonding temperatures of yttria stabilized zirconia polycrystals using nanocrystals could be reduced. From the studies, it is found out that the bonding is the result of the grain rotation that accompanies grain boundary sliding. The superplastic flow has the potential to produce strong joints in a temperature lower than the 2000 C being reported in the previous studies.

引用

页码：455 / 460

页数：6

共 50 条

[1] Plasticity of nanocrystalline yttria-stabilized tetragonal zirconia polycrystals
Gutiérrez-Mora, F
Domínguez-Rodríguez, A
Jiménez-Melendo, M
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (14-15) : 2615 - 2620
[2] Optimal sandblasting conditions for conventional-type yttria-stabilized tetragonal zirconia polycrystals
Okada, Masahiro
Taketa, Hiroaki
Torii, Yasuhiro
Irie, Masao
Matsumoto, Takuya
DENTAL MATERIALS, 2019, 35 (01) : 169 - 175
[3] Cyclic fatigue resistance of yttria-stabilized tetragonal zirconia polycrystals with hot isostatic press processing
Koyama, Taku
Sato, Toru
Yoshinari, Masao
DENTAL MATERIALS JOURNAL, 2012, 31 (06) : 1103 - 1110
[4] Influence of surface and subsurface properties on the bonding between yttria stabilized tetragonal zirconia polycrystals and a veneering ceramic
Breidenstein, Bernd
Busemann, Sarah
Stiesch, Meike
Greuling, Andreas
Worpenberg, Christin
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2021, 35 (16) : 1764 - 1776
[5] Making yttria-stabilized tetragonal zirconia translucent
Zhang, Yu
DENTAL MATERIALS, 2014, 30 (10) : 1195 - 1203
[6] LUMINESCENCE OF POLYCRYSTALLINE CUBIC AND TETRAGONAL YTTRIA-STABILIZED ZIRCONIA
PAJE, SE
LLOPIS, J
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 1994, 55 (08) : 671 - 676
[7] Transient thermal stresses developed during speed sintering of 3 mol% yttria-stabilized tetragonal zirconia polycrystals
Alshahrani, Abdulaziz M.
Lim, Chek Hai
Kim, Jeongho
Zhang, Yu
DENTAL MATERIALS, 2023, 39 (05) : 522 - 528
[8] Impact of High-Speed Sintering on Accuracy and Fit of 4 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystals
Anton, Xenia
Stawarczyk, Bogna
Reymus, Marcel
Joda, Tim
Liebermann, Anja
INTERNATIONAL JOURNAL OF PROSTHODONTICS, 2021, 34 (06) : 775 - 783
[9] An examination of the flow process in superplastic yttria-stabilized tetragonal zirconia
Berbon, MZ
Langdon, TG
ACTA MATERIALIA, 1999, 47 (08) : 2485 - 2495
[10] Effect of Yttria Content on the Translucency and Masking Ability of Yttria-Stabilized Tetragonal Zirconia Polycrystal
Cho, Young-Eun
Lim, Young-Jun
Han, Jung-Suk
Yeo, In-Sung Luke
Yoon, Hyung-In
MATERIALS, 2020, 13 (21) : 1 - 10

← 1 2 3 4 5 →