Chromium removal with cross-linked chitosan adsorption and base-precipitation combination

A novel technique for a complete removal of both Cr(VI) and Cr(III) ions, namely cross-linked chitosan (CCTS) adsorption and base-precipitation combination, was studied in this work in great detail. The optimum conditions for Cr(VI) adsorption onto CCTS were determined as a function of pH, CCTS dosage and contact time, while Cr(III) precipitation was investigated as a function of pH value. The Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the Cr(VI) adsorption isotherm on CCTS. The Langmuir model agreed much better with experimental data than the Freundlich and D-R by a correlation coefficient (R-2) of 0.994. The capacity and Delta G degrees of CCTS for Cr(VI) were 70.4 mg/g and -26.6 kJ/mol respectively, indicating the feasible and spontaneous nature of the Cr(VI) sorption process. This combined technique was applied for real wastewater treatment from the electroplating industry and obtained a one-off retention in solution not more than 0.5 mg/L for both Cr(VI) and Cr total. These results meet the Chinese standards for effluent discharge.