Development of a drop-on-demand micro dispensing system

被引:8
作者
Feng, W [1 ]
Fuh, JYH [1 ]
Wong, YS [1 ]
机构
[1] Natl Univ Singapore, Dept Mech Engn, Lab Concurrent Engn & Logist, Singapore 119260, Singapore
来源
PROGRESS ON ADVANCED MANUFACTURE FOR MICRO/NANO TECHNOLOGY 2005, PT 1 AND 2 | 2006年 / 505-507卷
关键词
drop-on-demand; micro-dispensing; rapid prototyping;
D O I
10.4028/www.scientific.net/MSF.505-507.25
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper presents the development a drop-on-demand micro-dispensing system on which functional devices can be directly printed in a layer-by-layer manner that is commonly used in Rapid Prototyping and Manufacturing processes. The principle is to form micro droplets on substrate that requires accuracy and consistency with the ability to build 3D model. It requires heating of material to a desired temperature and viscosity which allows the piezoelectric the ability to pump out. In order to build a 3D model, a basic XYZ-axis gantry, motion controller and dispenser with temperature controller were developed and integrated. Experiments with different materials were carried out to understand the influences of the dispensing parameters on continuous frequency output. The results hold attractive potential for the use of this system in fabricating 3D models which meet the accuracy and resolution needs for various industry applications.
引用
收藏
页码:25 / 29
页数:5
相关论文
共 50 条
[21]   Experimental research and development of metal drop-on-demand spray apparatus driven by the stress wave [J].
Tao, Yuan ;
Yang, Fang ;
Luo, Jun ;
Chao, Yanpu ;
Qi, Lehua .
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2013, 49 (07) :162-167
[22]   Evolution and operating experiences with different drop-on-demand systems [J].
Burgold, J ;
Weise, F ;
Fischer, M ;
Schlingloff, G ;
Henkel, T ;
Albert, J ;
Mayer, G ;
Schober, A .
MACROMOLECULAR RAPID COMMUNICATIONS, 2005, 26 (04) :265-280
[23]   Drop-on-demand satellite-free drop formation for precision fluid delivery [J].
Yang, Lisong ;
Kapur, Nik ;
Wang, Yiwei ;
Fiesser, Fritz ;
Bierbrauer, Frank ;
Wilson, Mark C. T. ;
Sabey, Tim ;
Bain, Colin D. .
CHEMICAL ENGINEERING SCIENCE, 2018, 186 :102-115
[24]   A High Temperature Drop-On-Demand Droplet Generator for Metallic Melts [J].
Moqadam, Saeedeh Imani ;
Maedler, Lutz ;
Ellendt, Nils .
MICROMACHINES, 2019, 10 (07)
[25]   Evaluation of jet performance in drop-on-demand (DOD) inkjet printing [J].
Jo, Byoung Wook ;
Lee, Ayoung ;
Ahn, Kyung Hyun ;
Lee, Seung Jong .
KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2009, 26 (02) :339-348
[26]   Evaluation of jet performance in drop-on-demand (DOD) inkjet printing [J].
Byoung Wook Jo ;
Ayoung Lee ;
Kyung Hyun Ahn ;
Seung Jong Lee .
Korean Journal of Chemical Engineering, 2009, 26 :339-348
[27]   Standardized Sample Preparation Using a Drop-on-Demand Printing Platform [J].
Holthoff, Ellen L. ;
Farrell, Mikella E. ;
Pellegrino, Paul M. .
SENSORS, 2013, 13 (05) :5814-5825
[28]   Meniscus height as a function of dimensionless variables for drop-on-demand applications [J].
Hyun, Choi Kyung ;
Mehdi, Syed Murtuza .
JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2013, 62 (09) :1247-1251
[29]   Effect of Meniscus Damping Ratio on Drop-on-Demand Electrohydrodynamic Jetting [J].
Kim, Samuel Haedong ;
Kang, Heuiseok ;
Kang, Kyungtae ;
Lee, Sang Ho ;
Cho, Kwan Hyun ;
Hwang, Jun Young .
APPLIED SCIENCES-BASEL, 2018, 8 (02)
[30]   Meniscus height as a function of dimensionless variables for drop-on-demand applications [J].
Choi Kyung Hyun ;
Syed Murtuza Mehdi .
Journal of the Korean Physical Society, 2013, 62 :1247-1251