First-ply Strength of Thick Circular Cylindrical GRP Composite Shell subjected to Static External Pressure via Finite Element Simulation and Analytical Approaches

被引：2

作者：

Gohari, Soheil ^{[1
]}

Golshan, Abolfazl ^{[2
]}

Hashemzadeh, Mohammadhassan ^{[1
]}

Hosseininezhad, Navid ^{[1
]}

机构：

[1] Univ Teknol Malaysia, Fac Mech Engn, Utm Skudai 81310, Malaysia

[2] Isfahan Univ Technol, Fac Mech Engn, Esfahan, Iran

来源：

ADVANCED MATERIALS RESEARCH II, PTS 1 AND 2 | 2012年 / 463-464卷

关键词：

first-ply strength; laminated GFRP cylinder; static external pressure; maximum stress criterion; fern simulation; analytical solution; failure criteria; OPTIMUM DESIGN; VESSELS; FAILURE;

D O I：

10.4028/www.scientific.net/AMR.463-464.477

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

One-ply thick externally pressurized GFRP cylinders were analyzed using computational numerical simulation and analytical method. The main part of the work was to study the critical external pressure to avoid failure in the laminated shells by employing various phenomenological failure criteria. Comparison between ABAQUS FEM simulation results and analytical solutions using MATLAB programming codes proved high accuracy of the analytical approach. Various fiber angles stacking sequences were chosen for optimization analysis. The results did not show any increase in stability as the layer number increased. The results also showed high correlation with corresponding failure criteria. The analytical solutions gave higher accuracy as the number of plies and the total laminate thicknesses were reduced.

引用

页码：477 / +

页数：2

共 10 条

[1] OPTIMIZATION OF LAMINATED CYLINDRICAL PRESSURE-VESSELS UNDER STRENGTH CRITERION [J].

ADALI, S ;

SUMMERS, EB ;

VERIJENKO, VE .

COMPOSITE STRUCTURES, 1993, 25 (1-4) :305-312

[2] Experimental and theoretical analyses of first-ply failure of laminated composite pressure vessels [J].

Chang, RR .

COMPOSITE STRUCTURES, 2000, 49 (02) :237-243

[3] A DESIGN METHOD FOR FILAMENT WOUND GRP VESSELS AND PIPEWORK [J].

ECKOLD, GC .

COMPOSITES, 1985, 16 (01) :41-47

[4]

Fukunaga H., 1983, J COMP STRUCT, V1, P3149

[5]

Fukunaga H., 1988, J COMPOS MATER, V22, P1157

[6] First-ply failure strength of laminated composite pressure vessels [J].

Kam, TY ;

Liu, YW ;

Lee, FT .

COMPOSITE STRUCTURES, 1997, 38 (1-4) :65-70

[7]

Kulkarmi S. V., 1997, PVPPB021 ASME

[8] Optimum design of dome contour for filament-wound composite pressure vessels based on a shape factor [J].

Liang, CC ;

Chen, HW ;

Wang, CH .

COMPOSITE STRUCTURES, 2002, 58 (04) :469-482

[9]

Roaa C.T.F., 2003, OCEAN ENG, V30, P691

[10] OPTIMUM DESIGN OF A REINFORCED CYLINDRICAL PRESSURE-VESSEL [J].

TAUCHERT, TR .

JOURNAL OF COMPOSITE MATERIALS, 1981, 15 (SEP) :390-402

← 1 →