Pure aluminum with different grain size distributions by consolidation of particles using equal-channel angular pressing with back pressure

被引:22
作者
Wu, X.
Xu, W.
Xia, K. [1 ]
机构
[1] Univ Melbourne, Dept Mech & Mfg Engn, Parkville, Vic 3010, Australia
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 493卷 / 1-2期
关键词
equal channel angular pressing; back pressure; severe plastic deformation; particle consolidation; nanostructured; aluminum;
D O I
10.1016/j.msea.2007.06.088
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Equal-channel angular pressing (ECAP) with back pressure was used to consolidate particles into bulk materials. In the present study, fully dense bulk aluminum was consolidated from nanoparticles and mixtures of nano and microparticles in varying proportions to obtain different grain size distributions. These materials were processed by ECAP for four passes at 673 K with the application of a constant back pressure of 200 MPa. Mechanical tests showed that hardness and strength increased significantly with increasing volume fraction of the nanoparticles while ductility decreased. Transmission electron microscopy examination and X-ray diffraction analysis showed Al nanocrystals of the order of 10 turn in the material consolidated from 100% nanoparticles whereas a bimodal distribution of grain sizes was observed in the mixtures. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:241 / 245
页数:5
相关论文
共 50 条
  • [41] The role of grain orientation in microstructure evolution of pure aluminum processed by equal channel angular pressing
    Hoseini, Majid
    Meratian, Mahmood
    Toroghinejad, Mohammad R.
    Szpunar, Jerzy A.
    MATERIALS CHARACTERIZATION, 2010, 61 (12) : 1371 - 1378
  • [42] Mechanical properties and machinability of 6061 aluminum alloy produced by equal-channel angular pressing
    Asl, Yashar Bayat
    Meratian, Mahmood
    Emamikhah, Afshin
    Homami, Rasool Mokhtari
    Abbasi, Alireza
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (08) : 1302 - 1313
  • [43] The evolution of homogeneity and grain refinement during equal-channel angular pressing: A model for grain refinement in ECAP
    Xu, C
    Furukawa, M
    Horita, Z
    Langdon, TG
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2): : 66 - 76
  • [44] Optimization of microstructure for superplasticity using equal-channel angular pressing
    Furukawa, M
    Oh-ishi, K
    Komura, S
    Yamashita, A
    Horita, Z
    Nemoto, M
    Langdon, TG
    TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 97 - 102
  • [45] Microstructural evolution for superplasticity using equal-channel angular pressing
    Nemoto, M
    Horita, Z
    Furukawa, M
    Langdon, TG
    TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 59 - 66
  • [46] Similarity of grain-size evolution near frictional interfaces and in the process of equal-channel angular pressing
    Alexandrov, S. E.
    Goldstein, R. V.
    DOKLADY PHYSICS, 2013, 58 (05) : 177 - 180
  • [47] Principles of grain refinement in magnesium alloys processed by equal-channel angular pressing
    Figueiredo, Roberto B.
    Langdon, Terence G.
    JOURNAL OF MATERIALS SCIENCE, 2009, 44 (17) : 4758 - 4762
  • [48] The Influence of Texture and Grain Size on Compressive Deformation Behavior of Pure Mg Through Equal-Channel Angular Processing
    Li, Jizhong
    Ding, Hue
    Wu, Xiaolin
    Xu, Wei
    Xia, Kenong
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2, 2011, 667-669 : 385 - +
  • [49] The link between microstructure and creep in aluminum processed by equal-channel angular pressing
    Saxl, I.
    Sklenicka, V.
    Ilucova, L.
    Svoboda, M.
    Dvorak, J.
    Kral, P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 503 (1-2): : 82 - 85
  • [50] Damage prediction of 7025 aluminum alloy during equal-channel angular pressing
    M.Ebrahimi
    Sh.Attarilar
    C.Gode
    F.Djavanroodi
    International Journal of Minerals Metallurgy and Materials, 2014, 21 (10) : 990 - 998