Pure aluminum with different grain size distributions by consolidation of particles using equal-channel angular pressing with back pressure

被引:22
|
作者
Wu, X.
Xu, W.
Xia, K. [1 ]
机构
[1] Univ Melbourne, Dept Mech & Mfg Engn, Parkville, Vic 3010, Australia
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 493卷 / 1-2期
关键词
equal channel angular pressing; back pressure; severe plastic deformation; particle consolidation; nanostructured; aluminum;
D O I
10.1016/j.msea.2007.06.088
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Equal-channel angular pressing (ECAP) with back pressure was used to consolidate particles into bulk materials. In the present study, fully dense bulk aluminum was consolidated from nanoparticles and mixtures of nano and microparticles in varying proportions to obtain different grain size distributions. These materials were processed by ECAP for four passes at 673 K with the application of a constant back pressure of 200 MPa. Mechanical tests showed that hardness and strength increased significantly with increasing volume fraction of the nanoparticles while ductility decreased. Transmission electron microscopy examination and X-ray diffraction analysis showed Al nanocrystals of the order of 10 turn in the material consolidated from 100% nanoparticles whereas a bimodal distribution of grain sizes was observed in the mixtures. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:241 / 245
页数:5
相关论文
共 50 条
  • [21] Achieving both powder consolidation and grain refinement for bulk nanostructured materials by equal-channel angular pressing
    Yoon, Seung Chae
    Nghiep, Do Minh
    Hong, Sun Ig
    Horita, Zenji
    Kim, Hyoung Seop
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 173 - +
  • [22] Application of equal-channel angular pressing for grain refinement of plate samples
    Kamachi, M
    Furukawa, M
    Horita, Z
    Langdon, TG
    ULTRAFINE GRAINED MATERIALS III, 2004, : 407 - 412
  • [23] Similarity of grain-size evolution near frictional interfaces and in the process of equal-channel angular pressing
    S. E. Alexandrov
    R. V. Goldstein
    Doklady Physics, 2013, 58 : 177 - 180
  • [24] Equal-Channel Angular Pressing and High-Pressure Torsion of Pure Copper: Evolution of Electrical Conductivity and Hardness with Strain
    Edalati, Kaveh
    Imamura, Kazutaka
    Kiss, Takanobu
    Horita, Zenji
    MATERIALS TRANSACTIONS, 2012, 53 (01) : 123 - 127
  • [25] THE HETEROGENEITY OF THE ALUMINUM STRUCTURE AND MECHANICAL PROPERTIES UNDER EQUAL-CHANNEL ANGULAR PRESSING
    Ivanov, K. V.
    Naidenkin, E. V.
    RUSSIAN PHYSICS JOURNAL, 2009, 52 (10) : 1030 - 1035
  • [26] Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper
    Ribbe, Jens
    Schmitz, Guido
    Roesner, Harald
    Lapovok, Rimma
    Estrin, Yuri
    Wilde, Gerhard
    Divinski, Sergiy V.
    SCRIPTA MATERIALIA, 2013, 68 (12) : 925 - 928
  • [27] The heterogeneity of the aluminum structure and mechanical properties under equal-channel angular pressing
    K. V. Ivanov
    E. V. Naidenkin
    Russian Physics Journal, 2009, 52 : 1030 - 1035
  • [28] Damage prediction of 7025 aluminum alloy during equal-channel angular pressing
    Ebrahimi, M.
    Attarilar, Sh.
    Gode, C.
    Djavanroodi, F.
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2014, 21 (10) : 990 - 998
  • [29] Grain refinement, thermal stability and tensile properties of 2024 aluminum alloy after equal-channel angular pressing
    Mao, J
    Kang, SB
    Park, JO
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 159 (03) : 314 - 320
  • [30] The nature of grain refinement in equal-channel angular pressing: a comparison of representative fcc and hcp metals
    Figueiredo, Roberto B.
    Langdon, Terence G.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (12) : 1638 - 1646