Simulations of crack development in brittle materials under dynamic loading using the numerical manifold method

被引:27
作者
Ning, Youjun [1 ]
Liu, Xinlian [1 ]
Kang, Ge [2 ]
Lu, Qi [1 ]
机构
[1] Southwest Petr Univ, Sch Mechatron Engn, Chengdu 610500, Sichuan, Peoples R China
[2] Beijing Inst Technol, State Key Lab Explos Sci & Technol, Beijing 100081, Peoples R China
关键词
Crack initiation; Crack propagation; Crack coalescence; Dynamic loading; Numerical manifold method (NMM); DISCONTINUOUS DEFORMATION ANALYSIS; FUNCTIONALLY GRADED MATERIALS; FINITE-ELEMENT-METHOD; PHASE-FIELD MODEL; SHEAR FAILURE; PROPAGATION; FRACTURE; SOLIDS; GROWTH;
D O I
10.1016/j.engfracmech.2022.108830
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Crack development in brittle materials under dynamic loading is widely involved in engineering, in which crack initiation, propagation and coalescence are typical phenomena. The numerical manifold method (NMM) is a unified continuous-discontinuous numerical method employing two cover systems, namely, mathematical covers and physical covers, which encounters no difficulty in the numerical representation of continua and complex discontinuities within one framework. In the present work, NMM is developed for the simulation of crack initiation, propagation and coalescence problems in brittle materials under dynamic loading based on the tensile strength criterion and the Mohr-Coulomb strength criterion for tensile and shear cracking, respectively. Four typical examples including the splitting of a rock bar, the Kalthoff-Winkler experiment, the cracking in tensile loaded pre-notched rectangular plates and the double-hole blasting of rect-angular plates are simulated. The numerically derived crack development results are compared with corresponding theoretical or experimental results. The mesh size sensitivity is discussed for the first two examples; the dynamic cracking mechanism in the rock bar example is investigated along with the stress wave propagation analysis; the influence of the initial crack and hole lo-cations on the crack path in the tensile loaded pre-notched example as well as the effect of the guiding notch in the double-hole blasting example are studied. Results indicate that the crack initiation, propagation and coalescence in brittle materials under dynamic loading are quite satisfactorily reproduced by NMM.
引用
收藏
页数:17
相关论文
共 67 条
  • [1] Modeling progressive failures in rock slopes with non-persistent joints using the numerical manifold method
    An, Xinmei
    Ning, Youjun
    Ma, Guowei
    He, Lei
    [J]. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2014, 38 (07) : 679 - 701
  • [2] An element-failure algorithm for dynamic crack propagation in general directions
    Beissel, SR
    Johnson, GR
    Popelar, CH
    [J]. ENGINEERING FRACTURE MECHANICS, 1998, 61 (3-4) : 407 - 425
  • [3] Belytschko T, 1999, INT J NUMER METH ENG, V45, P601, DOI 10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO
  • [4] 2-S
  • [5] Belytschko T, 1996, INT J NUMER METH ENG, V39, P923, DOI 10.1002/(SICI)1097-0207(19960330)39:6<923::AID-NME887>3.0.CO
  • [6] 2-W
  • [7] Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment
    Belytschko, T
    Chen, H
    Xu, JX
    Zi, G
    [J]. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2003, 58 (12) : 1873 - 1905
  • [8] Dynamic crack propagation with a variational phase-field model: limiting speed, crack branching and velocity-toughening mechanisms
    Bleyer, Jeremy
    Roux-Langlois, Clement
    Molinari, Jean-Francois
    [J]. INTERNATIONAL JOURNAL OF FRACTURE, 2017, 204 (01) : 79 - 100
  • [9] Numerical simulation of plugging failure in ballistic penetration
    Borvik, T
    Hopperstad, OS
    Berstad, T
    Langseth, M
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2001, 38 (34-35) : 6241 - 6264
  • [10] Numerical simulation of crack propagation and branching in functionally graded materials using peridynamic modeling
    Cheng, Zhanqi
    Liu, Yingkai
    Zhao, Jun
    Feng, Hu
    Wu, Yizhang
    [J]. ENGINEERING FRACTURE MECHANICS, 2018, 191 : 13 - 32