Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024

被引:3
作者
Negini, Hamzeh [1 ,3 ]
Rezaei, Amin [1 ]
Hajisafari, Mahmoud [2 ]
Momeni, Hossein [1 ]
机构
[1] Malek Ashtar Univ Technol, Metall Mat Ctr, POB 15875-1774, Tehran, Iran
[2] Islamic Azad Univ, Dept Met & Mat Engn, Yazd Branch, Yazd, Iran
[3] Malek Ashtar Univ Technol, Babaei Highway,Shabanloo St, Tehran, Iran
关键词
Semi-solid; Thermomechanical; 2024; alloy; Partial remelting; ALUMINUM-ALLOYS; MG ALLOY; PRECIPITATION; EVOLUTION; POWDER;
D O I
10.1007/s12666-019-01608-0
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
A thermomechanical processing (TMP) method consisting of annealing, cold working, and partial remelting was employed to modify the microstructure and mechanical properties of Al 2024 alloy. The effects of the semi-solid temperature and holding time at the semi-solid temperature on the microstructure of the alloy were studied. The results showed that the optimum parameters were 610 degrees C and 7 min. Also, T6 heat treatment was applied to the thermomechanical processed alloy with the best combination of the parameters to examine its effect on the characteristics of the alloy. The results revealed that the amounts of yield strength and ultimate tensile strength increased, but T6 heat treatment did not have any remarkable effect on the tensile properties of the thermomechanical processed sample but improved the hardness of the alloy. In addition, the fracture mode in the thermomechanical processed sample was ductile while in the sample that underwent T6, brittle fracture was dominant.
引用
收藏
页码:1201 / 1209
页数:9
相关论文
共 50 条
[41]   Understanding the influencing mechanism of CNTs on the microstructure and mechanical properties of semi-solid stir casting Al-Cu-Mg alloys [J].
Zhang, Zhenlin ;
Xiao, Ying ;
Xu, Jun ;
He, Min ;
Luo, Yajun ;
Xiang, Jun .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 18 :3949-3960
[42]   Significant improvement of semi-solid microstructure and mechanical properties of A356 alloy by ARB process [J].
Jamaati, Roohollah ;
Amirkhanlou, Sajjad ;
Toroghinejad, Mohammad Reza ;
Niroumand, Behzad .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06) :2495-2501
[43]   Microstructure and Properties of Semi-Solid Aluminum Alloys: A Literature Review [J].
Pola, Annalisa ;
Tocci, Marialaura ;
Kapranos, Plato .
METALS, 2018, 8 (03)
[44]   Effect of yttrium on the microstructure of a semi-solid A356 Al alloy [J].
LIU Zheng and HU Yongmei Faculty of Material and Chemical Engineering Jiangxi University of Science and Technology Ganzhou China .
Rare Metals, 2008, (05) :536-540
[45]   Effect of Annealing on Microstructure and Properties for Semi-solid Magnesium Strips [J].
Zhang Ying ;
Xu Jinhua ;
Xie Shuisheng ;
Geng Maopeng ;
Guo Hongmin ;
Zhao Haibo .
PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2, 2012, 704-705 :581-+
[46]   Effect of yttrium on the microstructure of a semi-solid A356 Al alloy [J].
Liu Zheng ;
Hu Yongmei .
RARE METALS, 2008, 27 (05) :536-540
[47]   Microstructure and mechanical properties of Sn-Bi Alloy treated in the semi-solid state by mechanical stirring process [J].
Li, Feng ;
Hu, Yongjun ;
Cheng, Xiaoling ;
Xiao, Xiaoting .
ADVANCES IN COMPOSITES, PTS 1 AND 2, 2011, 150-151 :1768-+
[48]   Microstructure and mechanical properties of TiNbFeCoAl alloys prepared by semi-solid sintering assisted by thermo-mechanical field [J].
Kang, L. M. ;
Pang, X. ;
Tan, H. G. ;
Qiu, Y. F. ;
Liu, H. L. ;
Luo, X. C. ;
Li, Z. J. ;
Yang, C. .
VACUUM, 2021, 190 (190)
[49]   Properties of Al-based Matrix and Diamond Composites Fabricated by Semi-solid Metal Processing [J].
Dai, Qiulian .
ADVANCES IN CHEMICAL ENGINEERING, PTS 1-3, 2012, 396-398 :440-445
[50]   Effect of mold temperature on microstructure and mechanical properties of CuSn10Pb2Ni3 alloy by semi-solid rheological forming [J].
Huo, Dingdong ;
Li, Yongkun ;
Zhou, Rongfeng ;
Wang, Zhijie ;
Zhang, Hao ;
Li, Zhaoqiang ;
Li, Yao ;
Wang, Lei .
MATERIALS TODAY COMMUNICATIONS, 2025, 45