Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024

被引：3
作者：
Negini, Hamzeh [1 ,3 ]
Rezaei, Amin [1 ]
Hajisafari, Mahmoud [2 ]
Momeni, Hossein [1 ]
机构：
[1] Malek Ashtar Univ Technol, Metall Mat Ctr, POB 15875-1774, Tehran, Iran
[2] Islamic Azad Univ, Dept Met & Mat Engn, Yazd Branch, Yazd, Iran
[3] Malek Ashtar Univ Technol, Babaei Highway,Shabanloo St, Tehran, Iran
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 05期
关键词：
Semi-solid; Thermomechanical; 2024; alloy; Partial remelting; ALUMINUM-ALLOYS; MG ALLOY; PRECIPITATION; EVOLUTION; POWDER;
D O I：
10.1007/s12666-019-01608-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A thermomechanical processing (TMP) method consisting of annealing, cold working, and partial remelting was employed to modify the microstructure and mechanical properties of Al 2024 alloy. The effects of the semi-solid temperature and holding time at the semi-solid temperature on the microstructure of the alloy were studied. The results showed that the optimum parameters were 610 degrees C and 7 min. Also, T6 heat treatment was applied to the thermomechanical processed alloy with the best combination of the parameters to examine its effect on the characteristics of the alloy. The results revealed that the amounts of yield strength and ultimate tensile strength increased, but T6 heat treatment did not have any remarkable effect on the tensile properties of the thermomechanical processed sample but improved the hardness of the alloy. In addition, the fracture mode in the thermomechanical processed sample was ductile while in the sample that underwent T6, brittle fracture was dominant.
引用
收藏
页码：1201 / 1209
页数：9
相关论文
共 50 条
[31]   Microstructure Evolution and Mechanical Properties of Semi-Solid Thixotropic Reverse Extrusion Tin Bronze [J].
Zhang Xiongchao ;
Chen Lei ;
Xiao Han ;
Zhou Yuhang ;
Chen Hao ;
Duan Zhike .
RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (06) :2240-2249
[32]   Study of microstructure and mechanical properties of aluminum 7075 alloy extruded in a semi-solid state [J].
Hajihassani, Kamran ;
Pouyafar, Vahid ;
Sadough, Seyed Ali .
MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
[33]   On the microstructure and mechanical properties of the AlCoCrCuNi high entropy alloy processed in the semi-solid state [J].
Rogal, L. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 709 :139-151
[34]   Effects of Deformation on the Microstructure and Properties of Semi-solid CuSn10 Alloys [J].
Wen Ke ;
Li Yongkun ;
Zhou Rongfeng ;
Yin Xinhua ;
Xiong Wentao ;
Liu Chengxiang ;
Zhang Yazhen .
RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (02) :424-434
[35]   Effect of Ca, RE elements and semi-solid processing on the microstructure and creep properties of AZ91 alloy [J].
Nami, B. ;
Shabestari, S. G. ;
Razavi, H. ;
Mirdamadi, Sh. ;
Miresmaeili, S. M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03) :1261-1267
[36]   Deformation mechanism of compression of 2024 Al alloy in semi-solid state [J].
Luo, SJ ;
Sun, JK .
CHINESE SCIENCE BULLETIN, 1999, 44 (17) :1561-1566
[37]   Deformation mechanism of compression of 2024 Al alloy in semi-solid state [J].
LUO Shoujing and SUN JiakuanSchool of Materials Science and Engineering Harbin Institute of Technology Harbin China .
Chinese Science Bulletin, 1999, (17) :1561-1566
[38]   MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE COMPONENTS DIE CAST WITH SECONDARY ALUMINUM ALLOYS BY SEED SEMI-SOLID PROCESS [J].
Timelli, Giulio ;
Capuzzi, Stefano ;
Ferraro, Stefano ;
Fabrizi, Alberto ;
Capra, Leonardo .
SHAPE CASTING, 2014, :217-224
[39]   Effect of solid solution treatment on microstructure and mechanical properties of Al-Si-Cu-Mg alloy prepared by semi-solid squeeze casting [J].
Hao, Jianfei ;
Chen, Bin ;
Xia, Peng ;
Wang, Zhipeng ;
Chen, Zhiping ;
Li, Runxia .
INTERNATIONAL JOURNAL OF METALCASTING, 2024, 18 (03) :2313-2327
[40]   Novel Partial Remelting Process and Microstructure Evolution of Semi-Solid 2024 Alloy [J].
Wang Shuncheng ;
Li Yuanyuan ;
Chen Weiping ;
Zheng Xiaoping .
RARE METAL MATERIALS AND ENGINEERING, 2009, 38 :192-196
12345