Corrosion Behavior of Mo5Si3-Based Metal Silicide Alloy

被引：0
作者：
Chen, H. [1 ]
Ma, Q. [2 ]
Shao, X. [1 ]
Ma, J. [1 ]
Huang, B. X. [1 ]
机构：
[1] Liaocheng Univ, Liaocheng Res Inst Nonferrous Met, Coll Mat Sci & Engn, Liaocheng 252000, Peoples R China
[2] Lanzhou Univ Technol, Sch Mat Sci & Engn, State Key Lab Gansu Adv Nonferrous Met Mat, Lanzhou 730050, Peoples R China
来源：
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE | 2012年 / 7卷 / 12期
关键词：
Metal silicide; Corrosion; Mo5Si3; Passive film; Intermetallics; MO-SI-B; OXIDATION BEHAVIOR; MECHANICAL-PROPERTIES; MOLYBDENUM SILICIDES; COMBUSTION SYNTHESIS; STAINLESS-STEEL; WEAR; RESISTANCE; COMPOSITE; COATINGS;
D O I：
暂无
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
The Mo5Si3-based alloy consisting of small particles Mo3Si uniformly distributed in a Mo5Si3 matrix was fabricated by hot press sintering method. Corrosion properties of the alloy were investigated using anodic polarization and immersion tests in 1 mol/L HCl, 1 mol/L H2SO4 and 1 mol/L NaOH solutions, respectively. Results showed that the alloy had very low corrosion rate in three tests solutions due to the formation of a stable and compact passive film (SiOx, MoO3 and MoO2) as well as the chemical stability and strong bonds with large covalent component inherent to Mo5Si3-based alloy. Only a slight pitting could be observed on the sample surface as a result of selective corrosion of the Mo3Si phases with respect to the Mo5Si3 matrix in NaOH solution. Meanwhile, the alloy exhibited excellent electrochemical corrosion resistance in acidic environments excluding NaOH solution. The alloy was less corrosion resistance because of the formation and dissolution of Na2SiO3 and damaging the integrity of SiO2 preservative in NaOH solution.
引用
收藏
页码：12680 / 12689
页数：10
相关论文
共 23 条
[1]   ELECTRONIC PROPERTIES OF OXIDE-FILMS AND PITTING SUSCEPTIBILITY OF TPE-304 STAINLESS-STEEL [J].
BIANCHI, G ;
CERQUETTI, A ;
TORCHIO, S ;
MAZZA, F .
CORROSION SCIENCE, 1972, 12 (06) :495-+
[2]   Corrosion resistance of molybdenum silicides in aqueous solutions [J].
Gonzalez-Rodriguez, JG ;
Rosales, I ;
Casales, M ;
Martinez, L .
JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2005, 9 (10) :691-697
[3]   Corrosion performance of molybdenum silicides in acid solutions [J].
Gonzalez-Rodriguez, JG ;
Rosales, I ;
Casales, M ;
Serna, S ;
Martinez, L .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 371 (1-2) :217-221
[4]   Corrosion properties of thin molybdenum silicide films [J].
Herranen, M ;
Bauer, AD ;
Carlsson, JO ;
Bunshah, RF .
SURFACE & COATINGS TECHNOLOGY, 1997, 96 (2-3) :245-254
[5]   Microstructures and densification of MoSi2-SiC composite by field-activated and pressure-assisted combustion synthesis [J].
Hu, Qiaodan ;
Luo, Peng ;
Yan, Youwei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 468 (1-2) :136-142
[6]   Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions [J].
Kocijan, Aleksandra ;
Donik, Crtomir ;
Jenko, Morlika .
CORROSION SCIENCE, 2007, 49 (05) :2083-2098
[7]   Preparation of Mo(Si,Al)2-ZrO2 nanocomposite powders by mechanical alloying [J].
Krakhmalev, PV .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2004, 22 (4-5) :205-209
[8]   Synthesis of protective Mo-Si-B coatings in molten salts and their oxidation behavior in an air-water mixture [J].
Kuznetsov, Sergey A. ;
Rebrov, Evgeny V. ;
Mies, Martijn J. M. ;
de Croon, Mart H. J. M. ;
Schouten, Jaap C. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4) :971-978
[9]   PROPERTIES OF MO-SILICIDES IN SI-GATE TECHNOLOGY [J].
NEPPL, F ;
MENZEL, G ;
SCHWABE, U .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1983, 130 (05) :1174-1178
[10]   Isothermal oxidation behaviour of Mo-Si-B and Mo-Si-B-Al alloys in the temperature range of 400-800°C [J].
Paswan, Sharma ;
Mitra, R. ;
Roy, S. K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 424 (1-2) :251-265
123