Refinement and Coarsening of Grains Caused by Tensile-Shear Tests in Ultra-Fine Grained Cu Processed by Severe Plastic Deformation

被引：2

作者：

Matsutani, Ryosuke ^{[1
]}

Miyajima, Yoji ^{[1
]}

Onaka, Susumu ^{[1
]}

机构：

[1] Tokyo Inst Technol, Sch Mat & Chem Technol, Dept Mat Sci & Engn, Yokohama, Kanagawa 2268502, Japan

来源：

MATERIALS TRANSACTIONS | 2019年 / 60卷 / 05期

关键词：

copper; ultra-fine grain; equal channel angular pressing; microstructure; electron back scatter diffraction; grain refinement; EVOLUTION; STRESS;

D O I：

10.2320/matertrans.M2018379

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Ultra-fine grained pure copper fabricated by equal-channel angular pressing was used as a sample. We made tensile-shear tests using specimens with notches cut from the sample and large shear deformation occurred between the notches. Microstructural changes between the notches caused by the large shear deformation were observed. Using micro scale lattices scribed on the surface of the specimen, we found both refinement and coarsening of grains caused by the large shear deformation. Although severe plastic deformation causes ultra-fine grained structure, it is known there is a limit of the grain refinement. The grain coarsening observed in the present study is considered to be the reason of the limit of the grain refinement caused by severe plastic deformation.

引用

页码：751 / 757

页数：7

共 17 条

[1] Mechanical behavior of a bulk nanostructured iron alloy [J].

Carsley, JE ;

Fisher, A ;

Milligan, WW ;

Aifantis, EC .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (09) :2261-2271

[2] Strength and tension/compression asymmetry in nanostructured and ultrafine-grain metals [J].

Cheng, S ;

Spencer, JA ;

Milligan, WW .

ACTA MATERIALIA, 2003, 51 (15) :4505-4518

[3] Microstructures and properties of copper processed by equal channel angular extrusion for 1-16 passes [J].

Dalla Torre, F ;

Lapovok, R ;

Sandlin, J ;

Thomson, PF ;

Davies, CHJ ;

Pereloma, EV .

ACTA MATERIALIA, 2004, 52 (16) :4819-4832

[4] New discoveries in deformed metals [J].

Hansen, N .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (12) :2917-2935

[5] Development of microstructure in FCC metals during cold work [J].

Hansen, N ;

Jensen, DJ .

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1999, 357 (1756) :1447-1469

[6] Microstructural characterizations of Cu processed by ECAP from 4 to 24 passes [J].

Huang, C. X. ;

Yang, H. J. ;

Wu, S. D. ;

Zhang, Z. F. .

NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2, 2008, 584-586 :333-337

[7] Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations [J].

Hughes, DA ;

Hansen, N ;

Bammann, DJ .

SCRIPTA MATERIALIA, 2003, 48 (02) :147-153

[8] Strain-induced coarsening in nano-grained films [J].

Jin, M. ;

Minor, A. M. ;

Morris, J. W., Jr. .

THIN SOLID FILMS, 2007, 515 (06) :3202-3207

[9] Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis [J].

Mishra, A. ;

Kad, B. K. ;

Gregori, F. ;

Meyers, M. A. .

ACTA MATERIALIA, 2007, 55 (01) :13-28

[10] A multiscale approach for modeling scale-dependent yield stress in polycrystalline metals [J].

Ohashi, Tetsuya ;

Kawamukai, Masato ;

Zbib, Hussein .

INTERNATIONAL JOURNAL OF PLASTICITY, 2007, 23 (05) :897-914

← 1 2 →