The behavior of short fatigue cracks during Very High Cycle (VHCF) Fatigue of duplex stainless steel

被引：30

作者：

Krupp, U. ^{[1
]}

Giertler, A. ^{[1
]}

Soeker, M. ^{[1
]}

Fu, H. ^{[2
]}

Doenges, B. ^{[2
]}

Christ, H. -J. ^{[2
]}

Huesecken, A. ^{[3
]}

Pietsch, U. ^{[3
]}

Fritzen, C. -P. ^{[4
]}

Ludwig, W. ^{[5
]}

机构：

[1] Univ Appl Sci Osnabruck, Fac Engn & Comp Sci, D-49009 Osnabruck, Germany

[2] Univ Siegen, Inst Mat Technol, D-57068 Siegen, Germany

[3] Univ Siegen, Solid State Phys, D-57068 Siegen, Germany

[4] Univ Siegen, Inst Mech & Control, D-57068 Siegen, Germany

[5] European Synchrotron Radiat Facil, F-38043 Grenoble, France

来源：

ENGINEERING FRACTURE MECHANICS | 2015年 / 145卷

关键词：

Duplex steel; VHCF; Short cracks; Modeling; Barrier strength; SLIP IRREVERSIBILITY; GROWTH; PROPAGATION; INITIATION; MODEL; REGIME; LIFE;

D O I：

10.1016/j.engfracmech.2015.03.024

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

During VHCF loading of duplex steels fatigue damage starts within the softer austenite phase. Depending on the spatial mismatch between the slip systems of neighboring grains, intergranular or transgranular fatigue cracks are initiated. If these cracks can propagate or are blocked depends on the interactions with the local microstructure. These interactions have been studied by ultrasonic fatigue testing in combination with electron microscopy and synchrotron diffraction experiments. It was found that the strength of the first microstructural barrier is decisive for VHCF life. The barrier strength as a function of the microstructural arrangement has been implemented in a micromechanical finite element approach that shall be used to predict the VHCF life or the existence of a fatigue limit for given microstructure parameters. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：197 / 209

页数：13

共 31 条

[1] Growth of short cracks during low and high cycle fatigue in a duplex stainless steel [J].

Alvarez-Armas, I. ;

Krupp, U. ;

Balbi, M. ;

Herenu, S. ;

Marinelli, M. C. ;

Knobbe, H. .

INTERNATIONAL JOURNAL OF FATIGUE, 2012, 41 :95-100

[2]

AlvarezArmas I, 2009, DUPLEX STAINLESS STEELS, P1

[3] Effect of local textures on microcrack propagation in fatigued fcc metals [J].

Blochwitz, C ;

Richter, R ;

Tirschler, W ;

Obrtlik, K .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 234 :563-566

[4] A microstructure-based fatigue-crack-initiation model [J].

Chan, KS .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34 (01) :43-58

[5] Micromechanical modeling of short fatigue cracks [J].

Christ, H. -J. ;

Fritzen, C. -P. ;

Koester, P. .

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2014, 18 (04) :205-211

[6]

Donges B, 2014, P VHCF 6 CHENGD

[7]

Duber O., 2007, VDI FORTSCHRITT BERI

[8] Experimental characterization and two-dimensional simulation of short-crack propagation in an austenitic-ferritic duplex steel [J].

Dueber, O. ;

Kuenkler, B. ;

Krupp, U. ;

Christ, H. -J. ;

Fritzen, C. -P. .

INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (09) :983-992

[9] 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography [J].

Herbig, Michael ;

King, Andrew ;

Reischig, Peter ;

Proudhon, Henry ;

Lauridsen, Erik M. ;

Marrow, James ;

Buffiere, Jean-Yves ;

Ludwig, Wolfgang .

ACTA MATERIALIA, 2011, 59 (02) :590-601

[10]

Huang Y, 1991, A user-material subroutine incroporating single crystal plasticity in the ABAQUS finite element program

← 1 2 3 4 →