Assessment of duplex coating combining plasma electrolytic oxidation and polymer layer on AZ31 magnesium alloy

被引：117

作者：

Arrabal, R. ^{[1
]}

Mota, J. M. ^{[2
]}

Criado, A. ^{[1
]}

Pardo, A. ^{[1
]}

Mohedano, M. ^{[1
]}

Matykina, E. ^{[1
]}

机构：

[1] Univ Complutense, Fac Ciencias Quim, Dept Ciencia Mat, E-28040 Madrid, Spain

[2] Desarrollo & Control Tecnol, Alcala De Henares 28806, Spain

来源：

SURFACE & COATINGS TECHNOLOGY | 2012年 / 206卷 / 22期

关键词：

Magnesium; Plasma electrolytic oxidation; Corrosion; Polymer coating; Impact; ac/dc/ac; MG-AL ALLOYS; CORROSION PROTECTION; PEO COATINGS; RESISTANCE; AZ91D; ENVIRONMENTS; CHLORIDE;

D O I：

10.1016/j.surfcoat.2012.05.091

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Mechanical and corrosion tests were performed on a polymer-coated AZ31 magnesium alloy pre-treated by plasma electrolytic oxidation (PEO). Results were compared with a fluorotitanate-zirconate conversion coating pre-treatment. Mechanical performance was assessed by standardized adhesion (ISO 2409:2007), impact (ISO 6272-1:2004) and impact + adhesion (ISO 6272/ASTMD2794) pass/fail tests. Corrosion behavior was monitored using electrochemical impedance spectroscopy (EIS), ac/dc/ac measurements and continuous exposure to salt fog per ASTM B117 and cyclic exposure per VDA 621-415 (VDA). The PEO + polymer coating revealed lower impact resistance but better corrosion resistance than the Ti/Zr + polymer coating. The ac/dc/ac procedure demonstrated to be faster than EIS measurements for evaluation of the corrosion performance of studied coatings. (c) 2012 Elsevier B.V. All rights reserved.

引用

页码：4692 / 4703

页数：12

共 53 条

[21]

Hutchins S., 2005, MAGNESIUM, P553

[22]

Hutchins S., 2004, Proceedings of the 6th International Conference Magnesium Alloy and Their Applications, P617

[23] Corrosion Resistance of Plasma-Anodized AZ91 Mg Alloy in the Electrolyte with/without Potassium Fluoride [J].

Hwang, Duck Y. ;

Kim, Yong A. ;

Shin, Dong H. .

MATERIALS TRANSACTIONS, 2009, 50 (03) :671-678

[24]

Jiang Y.F., 2011, ZHONGGUO YOUSE JINSH, V21, P1562

[25]

Jiang YF, 2011, MAGNESIUM TECHNOLOGY, P543

[26] Electroless Ni-P plating on Mg-10Gd-4.8Y-0.6Zr magnesium alloy with a new pretreatment process [J].

Jin, Jing ;

Liu, Chuming ;

Fu, Shengli ;

Gao, Yanrui ;

Shu, Xin .

SURFACE & COATINGS TECHNOLOGY, 2011, 206 (2-3) :348-353

[27] Polyoxadiazole-based coating for corrosion protection of magnesium alloy [J].

Kannan, M. Bobby ;

Gomes, D. ;

Dietzel, W. ;

Abetz, V. .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (19) :4598-4601

[28] Surface morphology characteristics and improvements on corrosion resistance in anodized Mg-Al alloys as a result of sealing treatments [J].

Kim, SJ ;

Kim, JI ;

Okido, M .

ECO-MATERIALS PROCESSING & DESIGN VI, 2005, 486-487 :129-132

[29] Influence of chloride ion concentration on the electrochemical corrosion behaviour of plasma electrolytic oxidation coated AM50 magnesium alloy [J].

Liang, J. ;

Srinivasan, P. Bala ;

Blawert, C. ;

Dietzel, W. .

ELECTROCHIMICA ACTA, 2010, 55 (22) :6802-6811

[30] Effect of additives on the properties of plasma electrolytic oxidation coatings formed on AM50 magnesium alloy in electrolytes containing K2ZrF6 [J].

Liu, Feng ;

Shan, Dayong ;

Song, Yingwei ;

Han, En-Hou .

SURFACE & COATINGS TECHNOLOGY, 2011, 206 (2-3) :455-463

← 1 2 3 4 5 6 →