Dynamic Properties of Star-Shaped, Solution-Polymerized Styrene-Butadiene Rubber and Its Cocoagulated Rubber-Filled with Silica/Carbon Black

被引:7
作者
Liu, Xiao [1 ]
Zhao, Suhe [2 ,3 ]
Yang, Yong [2 ]
Zhang, Xingying [2 ,3 ]
Wu, Youping [2 ,3 ]
机构
[1] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing 100124, Peoples R China
[2] Beijing Univ Chem Technol, Key Lab Beijing City Preparat & Proc Novel Polyme, Beijing 100029, Peoples R China
[3] Beijing Univ Chem Technol, Key Lab Nanomat, Minist Educ, Beijing 100029, Peoples R China
基金
中国国家自然科学基金;
关键词
applications; blends; properties and characterization; rubber; surfaces and interfaces; NATURAL-RUBBER; CARBON-BLACK; MECHANICAL-PROPERTIES; SILICA; BEHAVIOR; REINFORCEMENT; COMPOSITES; BLENDS;
D O I
10.1002/app.40348
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The dynamic properties, including the dynamic mechanical properties, flex fatigue properties, dynamic compression properties, and rolling loss properties, of star-shaped solution-polymerized styrene-butadiene rubber (SSBR) and organically modified nanosilica powder/star-shaped styrene-butadiene rubber cocoagulated rubber (N-SSBR), both filled with silica/carbon black (CB), were studied. N-SSBR was characterized by H-1-NMR, gel permeation chromatography, energy dispersive spectrometry, and transmission electron microscopy. The results show that the silica particles were homogeneously dispersed in the N-SSBR matrix. In addition, the N-SSBR/SiO2/CB-rubber compounds' high bound rubber contents implied good filler-polymer interactions. Compared with SSBR filled with silica/CB, the N-SSBR filled with these fillers exhibited better flex fatigue resistance and a lower Payne effect, internal friction loss, compression permanent set, compression heat buildup, and power loss. The nanocomposites with excellent flex fatigue resistance showed several characteristics of branched, thick, rough, homogeneously distributed cross-sectional cracks, tortuous flex crack paths, few stress concentration points, and obscure interfaces with the matrix. Accordingly, N-SSBR would be an ideal matrix for applications in the tread of green tires. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40348.
引用
收藏
页数:12
相关论文
共 47 条
  • [1] [Anonymous], 1998, RUBBER WORLD
  • [2] [Anonymous], POLYM COMPOS
  • [3] [Anonymous], THESIS U MAINZ
  • [4] [Anonymous], REINFORCEMENT ELASTO
  • [5] [Anonymous], CHINA ELAST
  • [6] A New Modifier for Silica in Reinforcing SBR Elastomers for the Tyre Industry
    Bertora, Alessandro
    Castellano, Maila
    Marsano, Enrico
    Alessi, Matteo
    Conzatti, Lucia
    Stagnaro, Paola
    Colucci, Giovanna
    Priola, Aldo
    Turturro, Antonio
    [J]. MACROMOLECULAR MATERIALS AND ENGINEERING, 2011, 296 (05) : 455 - 464
  • [7] Regeneration of carbon black from waste automobile tires
    Bhadra, S
    De, PP
    Mondal, N
    Mukhapadhyaya, R
    Das Gupta, S
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (02) : 465 - 473
  • [8] Payne effect and shear elasticity of silica-filled polymers in concentrated solutions and in molten state
    Cassagnau, P
    [J]. POLYMER, 2003, 44 (08) : 2455 - 2462
  • [9] Non-linear viscoelastic behaviour and modulus recovery in silica filled polymers
    Cassagnau, P
    Mélis, F
    [J]. POLYMER, 2003, 44 (21) : 6607 - 6615
  • [10] Influence of polymer-filler interactions on retraction behaviors of natural rubber vulcanizates reinforced with silica and carbon black
    Choi, SS
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 99 (03) : 691 - 696