Low-temperature firing and thick-film preparation in lead zirconate titanate ceramics

被引：1

作者：

Tsukahara, Y ^{[1
]}

Kobayashi, T ^{[1
]}

Kondo, M ^{[1
]}

Ogawa, T ^{[1
]}

机构：

[1] Shizuoka Inst Sci & Technol, Dept Elect Engn, Shizuoka 4378555, Japan

来源：

ASIAN CERAMIC SCIENCE FOR ELECTRONICS I | 2002年 / 214-2卷

关键词：

PZT ceramics; sintering aid; low-temperature firing; screen printing; thick-film; nickel alloy substrate; unimorphous actuator;

D O I：

10.4028/www.scientific.net/KEM.214-215.15

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Low-temperature firing of Lead Zirconate Titanate (PZT) ceramics was investigated to fabricate thick-films on metal substrates. Two kinds of PZT compositions and sintering aids were used to prepare thick-film pastes. There were suitable combinations of PZT compositions and sintering aids to carry out low-temperature firing below 1000 degrees C. After screen printing PZT pastes on heat-resistant nickel alloy substrates, they were fired at 800 degrees C for 2h. P-E hysteresis of the thick-films was observed in the case of PZT with 1 wt% Nb2O5 added and a sintering aid of 13 wt % Bi2O3-ZnO.

引用

页码：15 / 20

页数：6

共 6 条

[1]

KOGYOKAI DZ, 1974, PIEZOELECTRIC CERAMI, P176

[2]

Ogawa T., 1986, Japanese Journal of Applied Physics, Supplement, V25, P25

[3] CERAMIC COMPOSITES OF LEAD GERMANATE GLASS AND PZT CERAMICS [J].

OGAWA, T ;

SANO, A ;

SENDA, A ;

WAKINO, K .

JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1989, 28 :91-94

[4]

Ogawa T., 1992, Integrated Ferroelectrics, V1, P99, DOI 10.1080/10584589208215568

[5]

OGAWA T, 1999, TOK BRANCH M CER SOC, P62

[6]

Scholtis A, 1996, P S IAEA, P263

← 1 →