Tuning the Hardness of Produced Parts by Adjusting the Cooling Rate during Laser-Based Powder Bed Fusion of AlSi10Mg by Adapting the Process Parameters

被引：4

作者：

Leis, Artur ^{[1
,2
]}

Traunecker, David ^{[1
]}

Weber, Rudolf ^{[1
]}

Graf, Thomas ^{[1
]}

机构：

[1] Inst Strahlwerkzeuge IFSW, Pfaffenwaldring 43, D-70569 Stuttgart, Germany

[2] Grad Sch Excellence Adv Mfg Engn GSaME, Nobelstr 12, D-70569 Stuttgart, Germany

来源：

METALS | 2022年 / 12卷 / 12期

关键词：

LPBF; additive manufacturing; hardness; mechanical properties; AlSi10Mg; HALL-PETCH RELATIONSHIP; ALLOY; FINE;

D O I：

10.3390/met12122000

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The mechanical properties of parts produced by laser-based powder bed fusion (LPBF) are mainly determined by the grain structure in the material, which is governed by the cooling rate during solidification. This cooling rate strongly depends on the scan velocity and the absorbed laser power. Experiments with varying process parameters were performed to develop and validate an analytical model that predicts the hardness of printed AlSi10Mg parts. It was found that it is possible to tune the hardness of additively manufactured parts of AlSi10Mg in a range between 60 +/- 9 HV0.5 and 100 +/- 10 HV0.5 by adjusting the cooling rate during solidification with adapted process parameters.

引用

页数：10

共 50 条

[41] Manufacturing of thin wall structures in AlSi10Mg alloy by laser powder bed fusion through process parameters
Calignano, F.
Cattano, G.
Manfredi, D.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 255 : 773 - 783
[42] Effect of Processing Parameters on the Relative Density of AlSi10Mg Processed by Laser Powder Bed Fusion
Hovig, Even Wilberg
Holm, Hakon Dehli
Sorby, Knut
ADVANCED MANUFACTURING AND AUTOMATION VIII, 2019, 484 : 268 - 276
[43] On the thermal conductivity of AlSi10Mg and lattice structures made by laser powder bed fusion
Selo, Richard R. J.
Catchpole-Smith, Sam
Maskery, Ian
Ashcroft, Ian
Tuck, Christopher
ADDITIVE MANUFACTURING, 2020, 34 (34)
[44] Process Optimization for Up-Facing Surface Finish of AlSi10Mg Alloy Produced by Laser Powder Bed Fusion
Gao, Chaofeng
Tang, Huaping
Zhang, Shiheng
Ma, Zhibo
Bi, Yunjie
Rao, Jeremy-Heng
METALS, 2022, 12 (12)
[45] EVALUATION OF HIGH-TEMPERATURE TENSILE PROPERTIES OF HEAT-TREATED ALSI10MG ALLOY PRODUCED BY LASER-BASED POWDER BED FUSION
Di Egidio, Gianluca
Morri, Alessandro
Ceschini, Lorella
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 580 - 586
[46] AlSi10Mg/AlN Interface Grain Structure after Laser Powder Bed Fusion
Pelevin, Ivan A.
Ozherelkov, Dmitriy Yu.
Nalivaiko, Anton Yu.
Bodyakova, Anna I.
Chernyshikhin, Stanislav V.
Zotov, Boris O.
Korshunov, Andrey V.
Gromov, Alexander A.
METALS, 2022, 12 (12)
[47] Effect of welding speed on butt joint quality of laser powder bed fusion AlSi10Mg parts welded using Nd:YAG laser
Gogulamudi, Balakrishna
Bandlamudi, Raghu Kumar
Bhanavathu, Balakrishna
Guttula, Venkata Sarath Kumar
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2023, 114 (10-11) : 879 - 892
[48] Influence of satellite and agglomeration of powder on the processability of AlSi10Mg powder in Laser Powder Bed Fusion
Chu, Fuzhong
Zhang, Kai
Shen, Haopeng
Liu, Meijuan
Huang, Wenjing
Zhang, Xi
Liang, Enquan
Zhou, Zongyan
Lei, Liming
Hou, Juan
Huang, Aijun
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 11 : 2059 - 2073
[49] Influence of particle size distribution and morphology on the properties of the powder feedstock as well as of AlSi10Mg parts produced by laser powder bed fusion (LPBF)
Riener, Kirstin
Albrecht, Nikolaj
Ziegelmeier, Stefan
Ramakrishnan, Robert
Haferkamp, Lukas
Spierings, Adriaan B.
Leichtfried, Gerhard J.
ADDITIVE MANUFACTURING, 2020, 34 (34)
[50] Effect of Cross-Rolling on the Hardness of the AlSi10Mg Alloy Fabricated through Powder Bed Fusion
Vanitha, C.
Neelakantam, Mounika
Kunala, Harshitha
Sashank, C.
Pattanayak, Deepak K.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025, 34 (01) : 847 - 856

← 1 2 3 4 5 →