Tuning the Hardness of Produced Parts by Adjusting the Cooling Rate during Laser-Based Powder Bed Fusion of AlSi10Mg by Adapting the Process Parameters

被引：4

作者：

Leis, Artur ^{[1
,2
]}

Traunecker, David ^{[1
]}

Weber, Rudolf ^{[1
]}

Graf, Thomas ^{[1
]}

机构：

[1] Inst Strahlwerkzeuge IFSW, Pfaffenwaldring 43, D-70569 Stuttgart, Germany

[2] Grad Sch Excellence Adv Mfg Engn GSaME, Nobelstr 12, D-70569 Stuttgart, Germany

来源：

METALS | 2022年 / 12卷 / 12期

关键词：

LPBF; additive manufacturing; hardness; mechanical properties; AlSi10Mg; HALL-PETCH RELATIONSHIP; ALLOY; FINE;

D O I：

10.3390/met12122000

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The mechanical properties of parts produced by laser-based powder bed fusion (LPBF) are mainly determined by the grain structure in the material, which is governed by the cooling rate during solidification. This cooling rate strongly depends on the scan velocity and the absorbed laser power. Experiments with varying process parameters were performed to develop and validate an analytical model that predicts the hardness of printed AlSi10Mg parts. It was found that it is possible to tune the hardness of additively manufactured parts of AlSi10Mg in a range between 60 +/- 9 HV0.5 and 100 +/- 10 HV0.5 by adjusting the cooling rate during solidification with adapted process parameters.

引用

页数：10

共 50 条

[31] Influence of heat treatments on AlSi10Mg specimens manufactured with different laser powder bed fusion machines
Kempf, A.
Hilgenberg, K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 818
[32] Effects of Building Direction, Process Parameters and Border Scanning on the Mechanical Properties of Laser Powder Bed Fusion AlSi10Mg
Garcia-Zapata, Juan M.
Torres, Belen
Rams, Joaquin
MATERIALS, 2024, 17 (15)
[33] Gold-Silver Electroless Plating on Laser Powder-Bed Fusion Additively Printed AlSi10Mg Parts
Inberg, Alexandra
Ashkenazi, Dana
Kimmel, Giora
Shacham-Diamand, Yosi
Stern, Adin
METALS, 2020, 10 (05)
[34] Influence of Moisture on the Properties of AlSi10Mg Powder for Laser Powder Bed Fusion
Peres, Lucas Salomao
Gargarella, Piter
Paiva, Marcus Vinicius
Rodrigues, Ariano De Giovanni
Adamiak, Marcin
Batalha, Gilmar Ferreira
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2024, 27
[35] Effect of Hirtisation treatment on surface quality and mechanical properties of AlSi10Mg samples produced by laser powder bed fusion
Beevers, Emilie
Neumayer, Dominic
Bonvoisin, Benoit
Branda, Ana
Hansal, Selma
Doppler, Michael
Rohr, Thomas
Van Hooreweder, Brecht
MATERIALS TODAY COMMUNICATIONS, 2024, 38
[36] Correlating the microstructure and hardness of AlSi10Mg powder with additively-manufactured parts upon in-situ heat-treatments in laser beam powder bed fusion
Phutela, Chinmay
Bosio, Federico
Li, Peifeng
Aboulkhair, Nesma T.
ADDITIVE MANUFACTURING LETTERS, 2023, 7
[37] Analysis of the machinability when milling AlSi10Mg additively manufactured via laser-based powder bed fusion
Zimmermann, Marco
Mueller, Daniel
Kirsch, Benjamin
Greco, Sebastian
Aurich, Jan C.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 112 (3-4) : 989 - 1005
[38] Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion
Han, Quanquan
Gu, Heng
Soe, Shwe
Setchi, Rossi
Lacan, Franck
Hill, Jacob
MATERIALS & DESIGN, 2018, 160 : 1080 - 1095
[39] Effect of nAl2O3 on the part density and microstructure during the laser-based powder bed fusion of AlSi10Mg composite
Du, Zhenglin
Chen, Hui-Chi
Tan, Ming Jen
Bi, Guijun
Chua, Chee Kai
RAPID PROTOTYPING JOURNAL, 2020, 26 (04) : 727 - 735
[40] Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion
Cabrini, Marina
Calignano, Flaviana
Fino, Paolo
Lorenzi, Sergio
Lorusso, Massimo
Manfredi, Diego
Testa, Cristian
Pastore, Tommaso
MATERIALS, 2018, 11 (07):

← 1 2 3 4 5 →