Tuning the Hardness of Produced Parts by Adjusting the Cooling Rate during Laser-Based Powder Bed Fusion of AlSi10Mg by Adapting the Process Parameters

被引：4
|
作者：
Leis, Artur [1 ,2 ]
Traunecker, David [1 ]
Weber, Rudolf [1 ]
Graf, Thomas [1 ]
机构：
[1] Inst Strahlwerkzeuge IFSW, Pfaffenwaldring 43, D-70569 Stuttgart, Germany
[2] Grad Sch Excellence Adv Mfg Engn GSaME, Nobelstr 12, D-70569 Stuttgart, Germany
来源：
METALS | 2022年 / 12卷 / 12期
关键词：
LPBF; additive manufacturing; hardness; mechanical properties; AlSi10Mg; HALL-PETCH RELATIONSHIP; ALLOY; FINE;
D O I：
10.3390/met12122000
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The mechanical properties of parts produced by laser-based powder bed fusion (LPBF) are mainly determined by the grain structure in the material, which is governed by the cooling rate during solidification. This cooling rate strongly depends on the scan velocity and the absorbed laser power. Experiments with varying process parameters were performed to develop and validate an analytical model that predicts the hardness of printed AlSi10Mg parts. It was found that it is possible to tune the hardness of additively manufactured parts of AlSi10Mg in a range between 60 +/- 9 HV0.5 and 100 +/- 10 HV0.5 by adjusting the cooling rate during solidification with adapted process parameters.
引用
收藏
页数：10
相关论文
共 50 条
  • [1] Sustainable production of AlSi10Mg parts by laser powder bed fusion process
    Mercurio, Vincenza
    Calignano, Flaviana
    Iuliano, Luca
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (7-8) : 3117 - 3133
  • [2] Post-process drilling of AlSi10Mg parts by laser powder bed fusion
    Erturk, Alpay Tamer
    Yarar, Eser
    Ozer, Gokhan
    Bulduk, Mustafa Enes
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (3-4) : 1199 - 1212
  • [3] Process Window for Highly Efficient Laser-Based Powder Bed Fusion of AlSi10Mg with Reduced Pore Formation
    Leis, Artur
    Weber, Rudolf
    Graf, Thomas
    MATERIALS, 2021, 14 (18)
  • [4] Sustainable production of AlSi10Mg parts by laser powder bed fusion process
    Vincenza Mercurio
    Flaviana Calignano
    Luca Iuliano
    The International Journal of Advanced Manufacturing Technology, 2023, 125 : 3117 - 3133
  • [5] Critical assessment of the impact of process parameters on vertical roughness and hardness of thin walls of AlSi10Mg processed by laser powder bed fusion
    Poncelet, O.
    Marteleur, M.
    van der Rest, C.
    Rigo, O.
    Adrien, J.
    Dancette, S.
    Jacques, Pj
    Simar, A.
    ADDITIVE MANUFACTURING, 2021, 38
  • [6] Effects of Scanning Strategies, Part Orientation, and Hatching Distance on the Porosity and Hardness of AlSi10Mg Parts Produced by Laser Powder Bed Fusion
    Dejene, Naol Dessalegn
    Tucho, Wakshum Mekonnen
    Lemu, Hirpa G.
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2025, 9 (03):
  • [7] Wear Behavior of AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion and Gravity Casting
    Tonolini, Pietro
    Montesano, Lorenzo
    Tocci, Marialaura
    Pola, Annalisa
    Gelfi, Marcello
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (10)
  • [8] Understanding the Laser Powder Bed Fusion of AlSi10Mg Alloy
    Hyer, Holden
    Zhou, Le
    Park, Sharon
    Gottsfritz, Guilherme
    Benson, George
    Tolentino, Bjorn
    McWilliams, Brandon
    Cho, Kyu
    Sohn, Yongho
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2020, 9 (04) : 484 - 502
  • [9] Fatigue Improvement of AlSi10Mg Fabricated by Laser-Based Powder Bed Fusion through Heat Treatment
    Sajadi, Felix
    Tiemann, Jan-Marc
    Bandari, Nooshin
    Darabi, Ali Cheloee
    Mola, Javad
    Schmauder, Siegfried
    METALS, 2021, 11 (05)
  • [10] CO2 laser polishing of laser-powder bed fusion produced AlSi10Mg parts
    El Hassanin, Andrea
    Obeidi, Muhannad Ahmed
    Scherillo, Fabio
    Brabazon, Dermot
    SURFACE & COATINGS TECHNOLOGY, 2021, 419
12345