Synthesis of monophase Al4O4C and the effect of Al4O4C addition to MgO-C refractory

被引:51
|
作者
Yu, Chao [1 ]
Zhu, Hongxi [1 ]
Yuan, Wenjie [1 ]
Deng, Chengji [1 ]
Cui, Peng [1 ]
Zhou, Shimin [1 ]
机构
[1] Wuhan Univ Sci & Technol, State Key Lab Breeding Base Refractories & Ceram, Wuhan 430081, Peoples R China
基金
中国国家自然科学基金;
关键词
Al4O4C; Synthesis; Aluminum content; Antioxidant; Oxidation; HEAT-TREATMENT; ALUMINUM; TEMPERATURE; POWDER; BRICKS; SIZE; AL;
D O I
10.1016/j.jallcom.2013.06.088
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Monophase Al4O4C ceramic powder was synthesized using a mixture of alpha-alumina, carbon black and aluminum powders as raw materials. The effects of different starting compositions and raw materials ratio on the phase transformation and micromorphology of Al4O4C were investigated. The results indicated that alpha-alumina, carbon black and aluminum powders was more appropriate as raw materials, and 20 mol% excess of aluminum resulted in single phase Al4O4C. Al2OC would occur if excessive carbon black was used. The Al content was found to have a significant effect on the microstructure of synthesized Al4O4C. Al4O4C added to the MgO-C refractory initially reacts with CO to form Al2O3 and C. After the reaction, the formed Al2O3 will further react with MgO to form MgAl2O4. The above reaction processes can form protective layers on the surfaces of the refractories, which inhibit the oxidation of the refractories. (c) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:348 / 354
页数:7
相关论文
共 50 条
  • [1] Influence of heating temperature, keeping time and raw materials grain size on Al4O4C synthesis in carbothermal reduction process and oxidation of Al4O4C
    Zhao, Jianli
    Lin, Wei
    Yamaguchi, Akira
    Ommyoji, Junji
    Sun, Halin
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2007, 115 (1346) : 654 - 660
  • [2] Synthesis and characterization of AlN whiskers by nitridation of Al4O4C
    Cheng, Keren
    Yu, Chao
    Ding, Jun
    Deng, Chengji
    Zhu, Hongxi
    Xue, Zhengliang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 719 : 308 - 313
  • [3] Synthesis and characterisation of Al4O4C nanorod/CNT composites
    Yu, Chao
    Cheng, Keren
    Ding, Jun
    Deng, Chengji
    Xue, Zhengliang
    Wu, Xinxin
    Zhu, Hongxi
    CERAMICS INTERNATIONAL, 2017, 43 (14) : 11415 - 11420
  • [4] Decomposition of Al4O4C in the presence of C at high temperatures in vacuum
    Feng, Yuebin
    Hou, Hailan
    Yang, Bin
    Yang, Baomin
    Zi, Futing
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2018, 109 (05) : 399 - 404
  • [5] Oxidation behavior and mechanism of Al4O4C powders at 1000-1300 °C
    Dong, Bo
    Deng, Chengji
    Di, Jinghui
    Xing, Guangchao
    Ding, Jun
    Ma, Beiyue
    Zhu, Hongxi
    Yu, Chao
    MATERIALS CHARACTERIZATION, 2023, 203
  • [6] Synthesis of AL2O3 nanowires by heat-treating AL4O4C in a carbon-containing environment
    Cheng, Keren
    Deng, Chengji
    Ding, Jun
    Yu, Chao
    Zhu, Hongxi
    CERAMICS INTERNATIONAL, 2018, 44 (05) : 4996 - 5001
  • [7] Study on Reactions of Al4O4C with N2 at Reduced Pressures
    Zhang, Xiao
    Feng, Yue-Bin
    Chen, Zhen
    Yang, Bao-Min
    2016 INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING APPLICATION (ICMSEA 2016), 2016, : 254 - 258
  • [8] In-situ formation of plate-like Al4O4C and MWCNTs in Al2O3-C refractories with Al4SiC4 additives
    Yu, Chao
    Dong, Bo
    Deng, Chengji
    Ding, Jun
    Zhu, Hongxi
    Di, Jinghui
    MATERIALS CHEMISTRY AND PHYSICS, 2021, 263 (263)
  • [9] Photoluminescence, electrical and mechanical properties of ultra-long single crystalline Al4O4C nanowires
    Liu, Tong
    Li, Li
    Geng, Xin
    Yang, Changhong
    Huang, Shifeng
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 8150 - 8161
  • [10] Fabrication and microstructures characterization of AlN-Al2O3 porous ceramic by nitridation of Al4O4C
    Zheng, Yongxiang
    Deng, Chengji
    Ding, Jun
    Zhu, Hongxi
    Yu, Chao
    MATERIALS CHARACTERIZATION, 2020, 161