The Effects of Be on mechanical properties of Al-Mg2Si in Situ Composite

被引：0
|
作者：
Azarbarmas, Mortaza [1 ]
Emamy, Masoud [1 ]
Rasizadeh, Jafar [1 ]
Alipour, Mohammad [1 ]
Karamouz, Mostafa [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat, Ctr Excellence High Performance Mat, Tehran, Iran
来源：
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS | 2011年
关键词：
Al/Mg2Si composite; Beryllium; Modification; Tensile properties; TENSILE PROPERTIES; MICROSTRUCTURE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of Be content on the mechanical properties of Al-15%Mg2Si composite was investigated. The results showed that with the addition of 0.5%Be, the ultimate tensile strength (UTS) and elongation values reached from 252 to 280 MPa and 2.2 to 3.8%, respectively. A study of the specimen's fracture surfaces via scanning electron microscope (SEM) showed that adding Be increase the number of fine dimples that is consistent with results from tensile tests.
引用
收藏
页码：873 / 881
页数：9
相关论文
共 50 条
  • [41] Effect of Primary and Eutectic Mg2Si Crystal Modifications on the Mechanical Properties and Sliding Wear Behaviour of an Al-20Mg2Si-2Cu-xBi Composite
    Farahany, Saeed
    Ghandvar, Hamidreza
    Nordin, Nur Azmah
    Ourdjini, Ali
    Idris, Mohd Hasbullah
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2016, 32 (11) : 1083 - 1097
  • [42] Influence of neodymium addition on microstructure,tensile properties and fracture behavior of cast Al-Mg2Si metal matrix composite
    武晓峰
    张广安
    伍复发
    王喆
    JournalofRareEarths, 2013, 31 (03) : 307 - 312
  • [43] Influence of neodymium addition on microstructure, tensile properties and fracture behavior of cast Al-Mg2Si metal matrix composite
    Wu Xiaofeng
    Zhang Guang'an
    Wu Fufa
    Wang Zhe
    JOURNAL OF RARE EARTHS, 2013, 31 (03) : 307 - 312
  • [44] Effect of Isothermal Reheating at Different Holding Times on The Microstructure of Al-Mg2Si In-situ Cast Composite
    Malekan, A.
    Emamy, M.
    Ghiasinejad, J.
    Ghorbani, M. R.
    NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 669 - 672
  • [45] Effect of Ce Inoculation on Microstructure and Mechanical Properties of in situ Al–20%Mg2Si Composite
    Yingmin Li
    Tongyu Liu
    Shengyuan Chen
    Yuyan Ren
    International Journal of Metalcasting, 2019, 13 : 331 - 336
  • [46] Effect of cooling rate on growth and transformation of primary Mg2Si in Al-Mg2Si in situ composites
    Wang, Dongtao
    Zhang, Haitao
    Guo, Cheng
    Wu, Hailin
    Cui, Jianzhong
    JOURNAL OF MATERIALS RESEARCH, 2018, 33 (20) : 3458 - 3465
  • [47] Improving the Mechanical and Wear Properties of Mg-Mg2Si In-Situ Composite via Hybrid SiCp and Hot Working
    Khosravi, M.
    Emamy, M.
    Ra'ayatpour, M.
    Rassizadehghani, J.
    SILICON, 2023, 15 (01) : 533 - 546
  • [48] The study of Li effect on the microstructure and tensile properties of cast Al-Mg2Si metal matrix composite
    Khorshidi, R.
    Raouf, A. Honarbakhsh
    Emamy, M.
    Campbell, J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (37) : 9026 - 9033
  • [49] Effect of reinforcement amount, mold temperature, superheat, and mold thickness on fluidity of in-situ Al-Mg2Si composites
    Barenji, Reza Vatankhah
    CHINA FOUNDRY, 2018, 15 (01) : 66 - 74
  • [50] Effect of modification and aging treatment on mechanical properties of Mg2Si/Al composite
    Qin, Q. D.
    Li, W. X.
    Zhao, K. W.
    Qiu, S. L.
    Zhao, Y. G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (09): : 2253 - 2257
12345