Effect of starting powder properties on the structure and mechanical characteristics of Al-8Cr-1.5Fe alloy for high-temperature applications

被引：0
|
作者：
Neikov, O. D. [1 ]
Sirko, A. I.
Zakharova, N. P. [1 ]
Efimov, N. A. [1 ]
Vasil'eva, G. I. [1 ]
Sharovskii, A. O. [1 ]
Samelyuk, A. V. [1 ]
Goncharuk, V. A. [1 ]
Ivashchenko, R. K. [1 ]
机构：
[1] Natl Acad Sci Ukraine, Frantsevich Inst Problems Mat Sci, Kiev, Ukraine
来源：
POWDER METALLURGY AND METAL CERAMICS | 2013年 / 52卷 / 3-4期
关键词：
gas-atomized powders; water-atomized powders; high-temperature aluminum alloy; structure; strength; strain hardening; CR-FE ALLOY; QUASI-CRYSTALLINE PARTICLES; ALUMINUM-ALLOYS; BEHAVIOR;
D O I：
10.1007/s11106-013-9507-9
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A high-temperature Al-8Cr-1.5Fe alloy has been developed for applications in the range from room temperature to 300A degrees C. The billets are obtained in two ways: using gas-atomized and water-atomized powders. Structural analysis shows that particles of the second phase in the water-atomized powders are finer and their number in the aluminum matrix is greater than that in the gas-atomized powders. The rods extruded from the water-atomized powders have much higher hardness, ultimate strength, and yield stress than those from the gas-atomized powders, plasticity being acceptable at all temperatures (20, 190, and 300A degrees C). An additional powder metallurgy operation-pulsed hot pressing-does not increase the strength of billets from either the water-atomized or gas-atomized powders. The alloy based on the water-atomized 0-63 mu m powder shows the maximum strength: 483, 332, and 261 MPa at 20, 190, and 300A degrees C, respectively.
引用
收藏
页码：144 / 153
页数：10
相关论文
共 50 条
  • [31] Influence of high-temperature solution treatments on mechanical properties of an Al-Si-Cu aluminum alloy
    Toda, Hiroyuki
    Nishimura, Takanori
    Uesugi, Kentaro
    Suzuki, Yoshio
    Kobayashi, Masakazu
    ACTA MATERIALIA, 2010, 58 (06) : 2014 - 2025
  • [32] Effect of the Carbon Content on the Structure and Mechanical Properties of a High-Temperature Carbide-Hardening Niobium-Molybdenum Alloy
    Gnesin, I. B.
    Karpov, M., I
    Prokhorov, D., V
    Gnesin, B. A.
    Stroganova, T. S.
    Zheltyakova, I. S.
    Vnukov, V., I
    Ryabenko, E., I
    Svetlov, I. L.
    RUSSIAN METALLURGY, 2022, 2022 (05): : 520 - 527
  • [33] Effect of Insoluble Elements on the Microstructural and Mechanical Properties of Light Al-Cu Alloy Produced by Powder Forging for High Strength Applications
    Lande, Vishwanath
    Dasharath, S. M.
    Babu, S. M. Jagadeesh
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
  • [34] Effect of High-Temperature Rolling and Annealing on the Structure and Properties of a Zirconium Based Amorphous Alloy
    Firsova, A. G.
    Tabachkova, N. Yu
    Bazlov, A., I
    PHYSICS OF METALS AND METALLOGRAPHY, 2021, 122 (08) : 789 - 793
  • [35] High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy)
    Daoud, H. M.
    Manzoni, A. M.
    Wanderka, N.
    Glatzel, U.
    JOM, 2015, 67 (10) : 2271 - 2277
  • [36] Laser powder bed fusion of an Al-Cr-Fe-Ni high-entropy alloy produced by blending of prealloyed and elemental powder: Process parameters, microstructures and mechanical properties
    Vogiatzief, D.
    Evirgen, A.
    Pedersen, M.
    Hecht, U.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 918
  • [37] Upset Forging Temperature Effect on Structure and Tribological Properties of Sintered Al-7Fe-38Sn Alloy
    Rusin, N. M.
    Skorentsev, A. L.
    Likharev, V. E.
    RUSSIAN PHYSICS JOURNAL, 2024, 67 (01) : 9 - 16
  • [38] Effect of high-temperature exposure on the mechanical properties of 18Cr-8Ni-W-Nb-V-N stainless steel
    Nikulin, I.
    Kipelova, A.
    Kaibyshev, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 554 : 61 - 66
  • [39] Microstructural, mechanical properties and high temperature oxidation of Cr, Al-coated Zr-4 alloy
    Huang, Jinghao
    Zou, Shuliang
    Xiao, Weiwei
    Liu, Xiaoshuang
    Chen, Huiqin
    Tang, Dewen
    Deng, Hua
    Zhou, Xi
    Lei, Ming
    NUCLEAR MATERIALS AND ENERGY, 2020, 25
  • [40] Effect of Ni additions on A356 alloy's microstructure and high-temperature mechanical properties
    Casari, D.
    Poli, F.
    Merlin, M.
    Di Giovanni, M. T.
    Li, Y.
    Di Sabatino, M.
    METALLURGIA ITALIANA, 2016, (06): : 33 - 36
12345