Parametric study and Modelling of Orthogonal Cutting Process for AISI 4340 and Ti-6Al-4V Alloy

被引：0

作者：

Bhatt, P. ^{[1
]}

Tewari, A. ^{[2
]}

Raval, H. K. ^{[3
]}

机构：

[1] Silver Oak Coll Engn & Technol, Ahmadabad 382481, Gujarat, India

[2] Indian Inst Technol, Bombay 400076, Maharashtra, India

[3] Sardar Vallabhbhai Natl Inst Technol, Surat 395007, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 02期

关键词：

Cutting forces; Carbide tool inserts; Coefficient of friction; Velocity;

D O I：

10.1016/j.matpr.2017.12.045

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The influence of parameters like velocity and depth of cut on cutting forces is investigated for the empirical relation of the coefficient of friction derived for CRS 1018 for different materials like, AISI 4340 and Ti6Al4V. For this purpose, turning tests were carried out on the above materials using coated cemented carbide tool inserts for steel grade and uncoated cemented carbide cutting tool inserts for Titanium with different chip breaker geometries. The cutting forces were measured using a Kistler dynamometer where the multiplication factor taken is 200. The effect of cutting force variation were analyzed experimentally and are compared with the analytical results. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：4730 / 4735

页数：6

共 5 条

[1]

[Anonymous], P 10 CIRP INT WORKSH

[2]

DONNELL LH, 1945, J APPL MECH-T ASME, V12, pA257

[3] A modelling of cutting for viscoplastic materials [J].

Dudzinski, D ;

Molinari, A .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1997, 39 (04) :369-389

[4]

MERCHANT E, 1945, J APPL PHYS, V16, P267

[5] Modelling of orthogonal cutting with a temperature dependent friction law [J].

Moufki, A ;

Molinari, A ;

Dudzinski, D .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1998, 46 (10) :2103-2138

← 1 →