Tensile testing of microfabricated thin films

Mechanical properties of titanium thin films of 0.5 mu m thickness and aluminum thin films of 1.0 mu m thickness, microfabricated by magnetron sputtering, were measured by using a novel tensile machine. These thin films are difficult to handle because they are fragile, so the thin film specimens were fabricated by using semiconductor manufacturing technology in a silicon frame to protect them. The test section of these specimens was 300 mu m in width and 1400 mu m in gauge length. By gripping the thin film specimen with a new device using a micrometer, it could be mounted on the tensile machine easily. The stress-strain diagrams of both thin films were measured continuously in the atmosphere at room temperature. The experimental results indicated that the titanium thin film and the aluminum thin film had a smaller breaking elongation although they had a larger tensile strength than bulk pure titanium and bulk pure aluminum, respectively.