Influence of a Reactive Organoclay on Polymerization and Properties of Polyurethane Nanocomposites

In this study, segmented polyurethane/clay nanocomposites were prepared via in situ intercalative polymerization of polyether polyol mixed nanoclay with toluene diisocyanate, followed by chain extending with 1,4-butanediol. The reactive prepolymer tended to gel by increasing the clay content from 0.4 to 1.5wt.%. This unusual phenomenon was found to be caused by a catalytic effect of quaternary ammonium intercalant on the organoclay. The procedure used for intercalated nanocomposites, is confirmed by wide angle X-ray diffraction studies. Thermogravimetric analysis results demonstrated a very good increase in onset degradation temperature by adding only 0.8wt.% of organoclay.