Linear friction welding of Ti-6Al-4V alloy fabricated below β-phase transformation temperature

被引：44
|
作者：
Choi, Jeong-Won [1 ]
Aoki, Yasuhiro [1 ]
Ushioda, Kohsaku [1 ]
Fujii, Hidetoshi [1 ]
机构：
[1] Osaka Univ, Joining & Welding Res Inst, Osaka, Ibaraki 5670047, Japan
来源：
SCRIPTA MATERIALIA | 2021年 / 191卷
基金：
日本学术振兴会;
关键词：
Interfacial temperature; Microstructure; Mechanical properties; Linear friction welding (LFW); Ti alloys; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1016/j.scriptamat.2020.09.013
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The interfacial temperature, microstructure and hardness distribution of the linear friction welded Ti-6Al-4V joints obtained at different applied pressures were investigated. The sound Ti-6Al-4V alloy joints were successfully fabricated below the beta-phase transformation temperature. The increased pressure considerably decreased the welding temperature. The dynamically recrystallized ultra-fined alpha equiaxed grains of 0.2 mu m were formed in the weld center of the joint by applying pressure of 550 MPa. Moreover, the hardness of the weld center was higher than that of the base material without the softened region in thermo-mechanical affected zone, which suggests the improved mechanical properties of the joints. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd.
引用
收藏
页码：12 / 16
页数：5
相关论文
共 50 条
  • [21] Friction stir welding of additively manufactured Ti-6Al-4V: Microstructure and mechanical properties
    Singh, Amit Kumar
    Kumar, Bhoopendra
    Jha, Kaushal
    Astarita, Antonello
    Squillace, Antonino
    Franchitti, Stefania
    Arora, Amit
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 277
  • [22] THE ROUGHNESS IN THE DIFFUSION WELDING OF TI-6AL-4V ALLOY
    ANDRZEJEWSKI, H
    BADAWI, KF
    ROLLAND, B
    WELDING JOURNAL, 1993, 72 (09) : S435 - S439
  • [23] Effect of Plate Thickness on Tensile Property of Ti-6Al-4V Alloy Joint Friction Stir Welded Below β-Transus Temperature
    Ji, Shude
    Wang, Yue
    Li, Zhengwei
    Ma, Lin
    Zhang, Liguo
    Yue, Yumei
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2017, 36 (07) : 693 - 699
  • [24] Friction-stir welding and processing of Ti-6Al-4V titanium alloy:A review
    S.Mironov
    Y.S.Sato
    H.Kokawa
    JournalofMaterialsScience&Technology, 2018, 34 (01) : 58 - 72
  • [25] Impact toughness and fracture analysis of linear friction welded Ti-6Al-4V alloy joints
    Ma, T. J.
    Li, W. -Y.
    Yang, S. Y.
    MATERIALS & DESIGN, 2009, 30 (06) : 2128 - 2132
  • [26] Linear friction welding of Ti-6Al-4V parts produced by electron beam melting
    Scherillo, Fabio
    Astarita, Antonello
    Carrino, Luigi
    Pirozzi, Carmine
    Prisco, Umberto
    Squillace, Antonino
    MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (02) : 201 - 207
  • [27] Ti-6Al-4V alloy strengthening via instantaneous phase transformation induced by electropulsing
    Xu, Xiaofeng
    Yan, Xudong
    Qian, Yu
    Chong, Xueying
    Zhou, Yachong
    Zhao, Yuguang
    Yang, Xuehui
    Liu, Gaofeng
    Wu, Chao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 899
  • [28] The Effect of Al and V on Microstructure and Transformation of β Phase during Solution Treatments of Cast Ti-6Al-4V Alloy
    Oh, Seong-Tak
    Woo, Kee-Do
    Kim, Jae-Hwang
    Kwak, Seung-Mi
    KOREAN JOURNAL OF METALS AND MATERIALS, 2017, 55 (03): : 150 - 155
  • [29] Structure and Properties of a Permanent Joint of Ti-6Al-4V Titanium Alloy Formed by Friction Stir Welding
    Chumaevskii, A., V
    Amirov, A., I
    Moskvichev, E. N.
    Ivanov, A. N.
    Kolubaev, E. A.
    RUSSIAN PHYSICS JOURNAL, 2022, 65 (05) : 765 - 770
  • [30] Effect of Process Parameters on Microstructure and Dynamic Compressive Property of Ti-6Al-4V Plates Fabricated via Friction Stir Welding
    Bao Jiawei
    Yang Ting
    Yang Suyuan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (01) : 637 - 647
12345