An experimental study on the spray behavior and fuel distribution of GDI injectors using the entropy analysis and PIV method

被引:29
作者
Lee, KH
Lee, CH
Lee, CS
机构
[1] Hanyang Univ, Dept Med Engn, Ansan 425791, Kyungki, South Korea
[2] Hanyang Univ, Dept Mech Engn, Seoul 133070, South Korea
关键词
entropy analysis; particle image velocimetry; vorticity strength; gasoline direct injection;
D O I
10.1016/j.fuel.2003.10.021
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
To improve the fuel consumption and exhaust emission for gasoline engines, Gasoline Direct Injection (GDI) system was spotlighted to solve above requirements. Thus, many researchers have been studied to investigate the spray characteristics and the fuel formation of GDI injector. In this study, we tried to study the characteristics of a direct injection gasoline spray by using entropy analysis and PIV methods. The entropy analysis is based on the concept of statistical entropy, and it identifies the degree of homogeneity in the fuel concentration. The PIV method was adopted to determine the fluid dynamics information at the spray. Also fuel formation within the cylinder in the case of early injection timing greatly influences combustion characteristics. This study developed the analyzing system for the mixing fuel with air using the Mie scattering method to visualize the fuel distribution. This technique was applied to a visualization single cylinder engine in order to investigate the spray behavior and fuel distribution. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:971 / 980
页数:10
相关论文
共 15 条
[1]  
Hinsch K.D., 1993, SPECKLE METROLOGY
[2]   THEORY OF CROSS-CORRELATION ANALYSIS OF PIV IMAGES [J].
KEANE, RD ;
ADRIAN, RJ .
APPLIED SCIENTIFIC RESEARCH, 1992, 49 (03) :191-215
[3]  
LECORDIER B, 1994, P ENGL INT S APPL LA
[4]  
LEE K, 2003, 16 ANN C LIQ AT SPR
[5]  
LEE KH, 2002, KSME, P1014
[6]  
LEE KH, 2001, KSME 2001 SPRING PAP
[7]  
PREUSSNER C, 1998, 980498 SAE
[8]   Main results of the First International PIV Challenge [J].
Stanislas, M ;
Okamoto, K ;
Kähler, C .
MEASUREMENT SCIENCE AND TECHNOLOGY, 2003, 14 (10) :R63-R89
[9]  
STEREOSCOPIC WC, 1997, MEAS SCI TECHNOL, V8, P1465
[10]  
STOLZ W, 1992, SAE INT FUELS LUBR M