Tolerances of imperfections and strength of cold-formed lipped channel column

被引：4

作者：

Sadovsky, Z. ^{[1
]}

Krivacek, J. ^{[1
]}

机构：

[1] Slovak Acad Sci, Inst Construct & Architecture, USTARCH SAV, Bratislava 84503, Slovakia

来源：

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH | 2017年 / 128卷

关键词：

Cold-formed steel; Lipped channel column; Ultimate strength; Geometrical imperfections; Execution tolerances; GENERALIZED BEAM THEORY; THIN-WALLED MEMBERS; RECTANGULAR-PLATES; STEEL; DESIGN;

D O I：

10.1016/j.jcsr.2016.10.006

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The paper addresses the ultimate buckling strength of thin-gauge axially loaded lipped channel columns with initial geometrical imperfections related to execution tolerances. For computational modelling of the column strength respecting the tolerance limits a deterministic method employing geometrical and material nonlinear FEM analysis with imperfections (GMNIA) is suggested. The imperfections are assumed in the shapes of eigenmodes of the corresponding linearized buckling problem and their combinations. For comparing their influence on the column strength, the imperfections are normalized by the energy measure. The comparison is carried out on the top energy measure level limited by execution tolerances. Referring to published experimental work three cross-sections and several column lengths are considered in a numerical study. Summarizing the numerical results and abilities of the energy measure to facilitate the treatment, guidance for the use of FEM GMNIA in the estimation of the column least strength is suggested. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：762 / 771

页数：10

共 18 条

[1] Finite element modelling of structural stainless steel cross-sections [J].

Ashraf, Mahmud ;

Gardner, Leroy ;

Nethercot, David A. .

THIN-WALLED STRUCTURES, 2006, 44 (10) :1048-1062

[2] Coupled instabilities with distortional buckling in cold-formed steel lipped channel columns [J].

Camotim, Dinar ;

Dinis, Pedro B. .

THIN-WALLED STRUCTURES, 2011, 49 (05) :562-575

[3] Linear buckling analysis of thin-walled members combining the Generalised Beam Theory and the Finite Element Method [J].

Casafont, Miquel ;

Marimon, Frederic ;

Pastor, Magdalena ;

Ferrer, Miquel .

COMPUTERS & STRUCTURES, 2011, 89 (21-22) :1982-2000

[4]

Johansson B., 2007, JRC Scientific and Technical Reports

[5] Review: Constrained finite strip method developments and applications in cold-formed steel design [J].

Li, Zhanjie ;

Abreu, Jean C. Batista ;

Leng, Jiazhen ;

Adany, Sandor ;

Schafer, Benjamin W. .

THIN-WALLED STRUCTURES, 2014, 81 :2-18

[6] GBT-based buckling mode decomposition from finite element analysis of thin-walled members [J].

Nedelcu, Mihai .

THIN-WALLED STRUCTURES, 2012, 54 :156-163

[7] Random field of initial deflections and strength of thin rectangular plates [J].

Sadovsky, Z. ;

Soares, C. Guedes ;

Teixeira, A. P. .

RELIABILITY ENGINEERING & SYSTEM SAFETY, 2007, 92 (12) :1659-1670

[8] Degradation of the compressive strength of rectangular plates due to initial deflection [J].

Sadovsky, Z ;

Teixeira, AP ;

Soares, CG .

THIN-WALLED STRUCTURES, 2005, 43 (01) :65-82

[9] Computational modelling of geometric imperfections and buckling strength of cold-formed steel [J].

Sadovsky, Z. ;

Krivacek, J. ;

Ivanco, V. ;

Duricova, A. .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2012, 78 :1-7

[10] Imperfection measures of eigen- and periodic modes of axially loaded stringer-stiffened cylindrical shell [J].

Sadovsky, Z. ;

Duricova, A. ;

Ivanco, V. ;

Krivacek, J. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2010, 224 (G5) :601-612

← 1 2 →