All-inkjet-printed electrical components and circuit fabrication on a plastic substrate

The objective of this work is to demonstrate the feasibility of inkjet-printed passive components. All passive components such as resistor, capacitor and inductor were inkjet printed on a polyimide (PI) substrate with various functional inks. For the insulator layer, poly-4-vinylphenol (PVP) and cross linking agent (poly(melamine-co-formaldehyde)) were dissolved in an ethanol. A mixture of poly(3,4-ethylene dioxythiophene) doped with polystyrene sulfonated acid (PEDOT:PSS) and ethylene glycol was used to print a resistor. Barium titanate (BaTiO3) and soft ferrite (Ni-Zn) powders were added to the synthesized insulator solution to improve its dielectric and magnetic characteristics, respectively. An RC circuit was also fabricated based on the results of the printed passive components. The printed electric components and circuit were characterized using LCR meter, function generator and digital oscilloscope. The measured responses of the printed RC circuit were in good agreement with estimated results. (C) 2012 Elsevier B.V. All rights reserved.