Microstructure and Mechanical Properties of Martensitic High-Strength Engineering Steel

被引：6
|
作者：
Maisuradze, M. V. [1 ]
Ryzhkov, M. A. [1 ]
Lebedev, D. I. [1 ,2 ]
机构：
[1] FGAOU VO BN Yeltsin Ural Fed Univ, Ekaterinburg, Russia
[2] Russian Acad Sci, MN Mikheev Inst Met Phys, Ural Sect, Ekaterinburg, Russia
来源：
METALLURGIST | 2020年 / 64卷 / 7-8期
关键词：
steel; martensite; bainite; microstructure; mechanical properties; strength; ductility; impact strength; heat treatment; BAINITE TRANSFORMATION; SUPERCOOLED AUSTENITE; M-S; PHASE;
D O I：
10.1007/s11015-020-01040-6
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A promising martensitic steel with good hardenability is studied. In the cooling rate range 0.1-30 degrees C/sec and the only transformation recorded by a dilatometer starts at an M-s temperature of 355 +/- 10 degrees C. Microstructure and mechanical properties of the steel studied are analyzed after various heat treatment regimes: cooling from the austenitizing temperature at various rates (from 0.02 to 20 degrees C/sec), austempering at 280-380 degrees C, and oil quenching and tempering at 200-600 degrees C. It is shown that a 1000-fold change in the cooling rate has a weak effect on steel strength. Bainitic transformation in the steel in question occurs in the martensitic transformation temperature range, which leads to a reduction in impact strength compared with a martensitic microstructure both after slow cooling and isothermal hardening.
引用
收藏
页码：640 / 651
页数：12
相关论文
共 50 条
  • [1] Microstructure and Mechanical Properties of Martensitic High-Strength Engineering Steel
    M. V. Maisuradze
    M. A. Ryzhkov
    D. I. Lebedev
    Metallurgist, 2020, 64 : 640 - 651
  • [2] Microstructure and Mechanical Properties of Friction Stir Welded 1.5 GPa Martensitic High-Strength Steel Plates
    Pengcheng Zhu
    Lin Zhang
    Zhaochang Li
    K. H. Lo
    Jianfeng Wang
    Yufeng Sun
    Shaokang Guan
    Acta Metallurgica Sinica (English Letters), 2022, 35 : 1079 - 1089
  • [3] Microstructure and Mechanical Properties of Friction Stir Welded 1.5 GPa Martensitic High-Strength Steel Plates
    Zhu, Pengcheng
    Zhang, Lin
    Li, Zhaochang
    Lo, K. H.
    Wang, Jianfeng
    Sun, Yufeng
    Guan, Shaokang
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2022, 35 (07) : 1079 - 1089
  • [4] Microstructure and Mechanical Properties of High-Strength Steel with Improved Machinability
    M. V. Maisuradze
    T. Björk
    Metallurgist, 2022, 66 : 391 - 402
  • [5] Microstructure and Mechanical Properties of High-Strength Steel with Improved Machinability
    Maisuradze, M. V.
    Bjork, T.
    METALLURGIST, 2022, 66 (3-4) : 391 - 402
  • [6] Microstructure and Mechanical Properties of Friction Stir Welded 1.5GPa Martensitic High-Strength Steel Plates
    Pengcheng Zhu
    Lin Zhang
    Zhaochang Li
    K. H. Lo
    Jianfeng Wang
    Yufeng Sun
    Shaokang Guan
    Acta Metallurgica Sinica(English Letters), 2022, 35 (07) : 1079 - 1089
  • [7] High-Strength Steel in the Steel- and Mechanical Engineering
    Wieland, Hans-Joachim
    Heise, Franz-Josef
    STAHLBAU, 2015, 84 (09) : 611 - 611
  • [8] The Effect of Martensitic Phase Transformation Dilation on Microstructure, Strain-Stress and Mechanical Properties for Welding of High-Strength Steel
    Chen, Xizhang
    Wang, Pengfei
    Pan, Qiuhong
    Lin, Sanbao
    CRYSTALS, 2018, 8 (07):
  • [9] Mechanical properties and microstructure of high-strength and high-ductility steel at elevated temperature
    Xia, Min
    Wu, Wentao
    Xue, Zhaojiang
    Sang, Ying
    Nie, Shuyu
    Jiang, Naisheng
    Guo, Hongyan
    He, Manchao
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2024, 218
  • [10] Effect of Holding Temperature on Microstructure and Mechanical Properties of High-Strength Multiphase Steel
    Hou, Zi Yong
    Wu, Di
    Zheng, Shu Xin
    Yang, Xiao Long
    Li, Zhuang
    Xu, Yun Bo
    STEEL RESEARCH INTERNATIONAL, 2016, 87 (09) : 1203 - 1212
12345