Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe-Mn-C twin-induced plasticity steel

被引:46
作者
Qian, Lihe [1 ]
Guo, Pengcheng [1 ]
Zhang, Fucheng [1 ]
Meng, Jiangying [1 ]
Zhang, Ming [1 ]
机构
[1] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2013年 / 561卷
基金
中国国家自然科学基金;
关键词
Metals and alloys; Mechanical properties; Deformation and fracture; High-manganese austenitic steel; Dynamic strain ageing; RATE SENSITIVITY; DEFORMATION; MECHANISM;
D O I
10.1016/j.msea.2012.10.087
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The serrated flow behavior of a Fe-Mn-C twin-induced plasticity steel was investigated at room temperature. Tensile tests were performed at various strain rates under extensometer-measured strain control, as compared to conventional crosshead displacement-controlled tests. Different types of serrations were observed with type C ones identified for the first time. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码:266 / 269
页数:4
相关论文
共 15 条
[1]   Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels [J].
Bouaziz, O. ;
Allain, S. ;
Scott, C. .
SCRIPTA MATERIALIA, 2008, 58 (06) :484-487
[2]   On the negative strain rate sensitivity of Hadfield steel [J].
Canadinc, D. ;
Efstathiou, C. ;
Sehitoglu, H. .
SCRIPTA MATERIALIA, 2008, 59 (10) :1103-1106
[3]  
CHARNOCK W, 1969, PHILOS MAG, V20, P427, DOI 10.1080/14786436908228714
[4]   Localized deformation due to Portevin-LeChatelier effect in 18Mn-0.6C TWIP austenitic steel [J].
Chen, Lei ;
Kim, Han-Soo ;
Kim, Sung-Kyu ;
De Cooman, B. C. .
ISIJ INTERNATIONAL, 2007, 47 (12) :1804-1812
[5]   MECHANISM OF WORK-HARDENING IN HADFIELD MANGANESE STEEL [J].
DASTUR, YN ;
LESLIE, WC .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (05) :749-759
[6]  
Gutierrez-Urrutia I., 2011, ACTA MAT, V59, P6449
[7]   On the mechanism of twin formation in Fe-Mn-C TWIP steels [J].
Idrissi, H. ;
Renard, K. ;
Ryelandt, L. ;
Schryvers, D. ;
Jacques, P. J. .
ACTA MATERIALIA, 2010, 58 (07) :2464-2476
[8]   Work hardening associated with ε-martensitic transformation, deformation twinning and dynamic strain aging in Fe-17Mn-0.6C and Fe-17Mn-0.8C TWIP steels [J].
Koyama, Motomichi ;
Sawaguchi, Takahiro ;
Lee, Taekyung ;
Lee, Chong Soo ;
Tsuzaki, Kaneaki .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (24) :7310-7316
[9]   On the mechanism of unstable plastic flow in an austenitic FeMnC TWIP steel [J].
Lebedkina, T. A. ;
Lebyodkin, M. A. ;
Chateau, J-Ph. ;
Jacques, A. ;
Allain, S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 519 (1-2) :147-154
[10]   On the origin of dynamic strain aging in twinning-induced plasticity steels [J].
Lee, Seok-Jae ;
Kim, Jinkyung ;
Kane, Shashank N. ;
De Cooman, Bruno Charles .
ACTA MATERIALIA, 2011, 59 (17) :6809-6819