Optimization of Process Parameters for Plasma Sprayed Flyash-Titania Composite Coatings

被引：8

作者：

Sunil, J. R. ^{[1
]}

Keshavamurthy, R. ^{[1
]}

Prakash, C. P. S. ^{[1
]}

Channabasappa, B. H. ^{[2
]}

机构：

[1] Dayananda Sagar Coll Engn, Dept Mech Engn, Bangalore 560078, Karnataka, India

[2] Ducom Instruments Pvt Ltd, Bangalore 560058, Karnataka, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期

关键词：

Plasma spray; Taguchi's orthogonal array; Analysis of variance; flyash; titania;

D O I：

10.1016/j.matpr.2015.07.189

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper focuses on optimization of process parameters for plasma sprayed Fly ash - Titania composite coating using design of experiments. Standoff distance, feed rate and current density were considered as process variables to be optimized and bond strength, porosity and hardness were investigated as response characteristics. Taguchi's L-9 orthogonal array was used for design of experiments. Analysis of variance was carried out to identify significant process parameters. The most important parameter for bond strength was current density; with 41% followed by standoff distance and powder feed rate. For porosity; current density; with 54% followed by standoff distance and powder feed rate and for hardness, powder feed rate; with 35% followed by standoff distance and current density. Verification experiments confirm the performance of optimum process parameters. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：2482 / 2490

页数：9

共 9 条

[1]

Ajit B., 2012, APPL FLY ASH COMPOSI

[2]

Azarmi F., J THERMAL SPRAY TECH, V17, P144

[3] Processing and characterisation of plasma sprayed zirconia-alumina-mullite composite coating on a mild-steel substrate [J].

Das, S ;

Ghosh, S ;

Pandit, A ;

Bandyopadhyay, TK ;

Chattopadhyay, AB ;

Das, K .

JOURNAL OF MATERIALS SCIENCE, 2005, 40 (18) :5087-5089

[4]

Koutsomichalis A., 2009, Tribology in industry, V31, P37

[5]

Krishna G. Gopala, 2013, IOSR J MECH CIVIL EN, V7, P01

[6] Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments [J].

Li, JF ;

Liao, HL ;

Ding, C ;

Coddet, C .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 160 (01) :34-42

[7] Friction stir welding and processing [J].

Mishra, RS ;

Ma, ZY .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2005, 50 (1-2) :1-78

[8]

Mishra S.C., FLY ASH COATING MAT, P131

[9]

Sert Y, 2013, MATER TEHNOL, V47, P181

← 1 →